ISiK Basis Implementierungsleitfaden
Version 6.0.0-rc - ci-build

Resource Profile: ISiKStandortRaum - Detailed Descriptions

Active as of 2025-12-17

Definitions for the ISiKStandortRaum resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Location
Definition

Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

ShortDetails and position information for a physical place
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Location.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Shortserverseitige, interne ID des DatensatzesLogical id of this artifact
Comments

bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine id verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine idverfügen.


The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeidstring
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Location.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Location.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Location.identifier
Definition

Unique code or number identifying the location to its users.

ShortEindeutiger Identifier des StandortsUnique code or number identifying the location to its users
Comments

Motivation: entspricht https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Organization label locations in registries, need to keep track of those.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Location.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ $this
  • 10. Location.identifier:standortnummer-dkg
    Slice Namestandortnummer-dkg
    Definition

    Unique code or number identifying the location to its users.

    ShortStandortnummer nach DKGUnique code or number identifying the location to its users
    Comments

    Motivation : Entsprechend der Festlegung der DKG laut Basisprofile-DE 1.5.0 (https://simplifier.net/packages/de.basisprofil.r4/)

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier(Identifier-Profil für die Standortnummer)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Organization label locations in registries, need to keep track of those.

    Pattern Value{
      "system" : "http://fhir.de/sid/dkgev/standortnummer"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Location.status
    Definition

    The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

    Shortactive | suspended | inactive
    Control0..1
    BindingThe codes SHALL be taken from LocationStatushttp://hl7.org/fhir/ValueSet/location-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/location-status|4.0.1)

    Indicates whether the location is still in use.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Location.operationalStatus
    Definition

    The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

    ShortThe operational status of the location (typically only for a bed/room)
    Comments

    Motivation: Entsprechend der Bedarfsmeldung im Rahmen der AG zur Ausbaustufe 4 muss ein System den Belegungsstatus eines Raums zum Abruf bereitstellen, sofern diese Information verfügbar ist. Dies dient z.B. der Markierung als 'Isoliert'.

    Control0..1
    BindingThe codes SHALL be taken from The codes SHOULD be taken from hl7VS-bedStatushttp://terminology.hl7.org/ValueSet/v2-0116
    (required to http://terminology.hl7.org/ValueSet/v2-0116)
    TypeCoding
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Location.name
    Definition

    Name of the location as used by humans. Does not need to be unique.

    ShortName des StandortName of the location as used by humans
    Comments

    Motivation: Kein Name zwingend notwendig (z.B. für ein Zimmer), wenn über .identifier identifizierbar; weicht daher ab von https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location


    If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Location.mode
    Definition

    Indicates whether a resource instance represents a specific location or a class of locations.

    ShortModus des Standortsinstance | kind
    Comments

    Motivation: Die Einschränkung auf "instance" erfolgt, da im ISiK-Kontext ausschließlich konkrete Standorte übertragen werden sollen. Hiermit wird zusätzlich die Kompatibilität zur MII-Spezifikation eines Standortes gewahrt https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location


    This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

    Control0..1
    BindingThe codes SHALL be taken from LocationModehttp://hl7.org/fhir/ValueSet/location-mode|4.0.1
    (required to http://hl7.org/fhir/ValueSet/location-mode|4.0.1)

    Indicates whether a resource instance represents a specific location or a class of locations.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

    Pattern Valueinstance
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Location.type
    Definition

    Indicates the type of function performed at the location.

    ShortTyp des StandortsType of function performed
    Comments

    Motivation: Ein System muss den Typ eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

    Control0..*
    BindingUnless not suitable, these codes SHALL be taken from ServiceDeliveryLocationRoleTypehttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType
    (extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

    Indicates the type of function performed at the location.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Location.address
    Definition

    Physical location.

    ShortAdresse des StandortsPhysical location
    Comments

    Motivation: Bei Verfügbarkeit einer Adresse muss ein System diese Information bereitstellen. Darüber hinaus muss das abrufende System diese Information verarbeiten können.


    Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

    Control0..1
    TypeAddress(Adresse, deutsches Basisprofil)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    If locations can be visited, we need to keep track of their address.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Location.physicalType
    Definition

    Physical form of the location, e.g. building, room, vehicle, road.

    ShortPhysikalischer Typ des StandortsPhysical form of the location
    Comments

    Motivation: entspricht der MII Vorgabe - siehe https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location. Ein System muss den physikalischen Typ eines Standorts zum Abruf bereitstellen, da ansonsten der Typus des Standorts nicht maschinenlesbar definiert ist.

    Control10..1
    BindingFor example codes, see LocationTypehttp://hl7.org/fhir/ValueSet/location-physical-type|4.0.1
    (example to http://hl7.org/fhir/ValueSet/location-physical-type|4.0.1)

    Physical form of the location.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    For purposes of showing relevant locations in queries, we need to categorize locations.

    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/location-physical-type",
        "code" : "ro",
        "display" : "Room"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Location.position
    Definition

    The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

    ShortGeodaten eines StandortsThe absolute geographic location
    Comments

    Motivation: Ein System muss die Geodaten eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

    Control0..1
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    For mobile applications and automated route-finding knowing the exact location of the Location is required.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Location.position.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Location.position.longitude
    Definition

    Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

    ShortLongitude with WGS84 datum
    Control1..1
    Typedecimal
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Location.position.latitude
    Definition

    Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

    ShortLatitude with WGS84 datum
    Control1..1
    Typedecimal
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Location.managingOrganization
    Definition

    The organization responsible for the provisioning and upkeep of the location.

    ShortVerwaltende Organisation des StandortsOrganization responsible for provisioning and upkeep
    Comments

    Motivation: entspricht https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location


    This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

    Control10..1
    TypeReference(Organization)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Need to know who manages the location.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Location.partOf
    Definition

    Another Location of which this Location is physically a part of.

    ShortOrganisationale ZugehörigkeitAnother Location this one is physically a part of
    Comments

    Motivation: Ein System muss die organisationale Zugehörigkeit eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

    Control0..1
    TypeReference(Location)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    For purposes of location, display and identification, knowing which locations are located within other locations is important.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Location.hoursOfOperation
    Definition

    What days/times during a week is this location usually open.

    ShortBetriebszeiten des StandortsWhat days/times during a week is this location usually open
    Comments

    Motivation: Ein System muss die Betriebszeiten eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.


    This type of information is commonly found published in directories and on websites informing customers when the facility is available.

    Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Location.hoursOfOperation.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

    Guidance on how to interpret the contents of this table can be foundhere

    0. Location
    2. Location.operationalStatus
    Comments

    Motivation: Entsprechend der Bedarfsmeldung im Rahmen der AG zur Ausbaustufe 4 muss ein System den Belegungsstatus eines Raums zum Abruf bereitstellen, sofern diese Information verfügbar ist. Dies dient z.B. der Markierung als 'Isoliert'.

    BindingThe codes SHALL be taken from hl7VS-bedStatus
    (required to http://terminology.hl7.org/ValueSet/v2-0116)
    Must Supporttrue
    4. Location.physicalType
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/location-physical-type",
        "code" : "ro",
        "display" : "Room"
      }]
    }

    Guidance on how to interpret the contents of this table can be foundhere

    0. Location
    Definition

    Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

    ShortDetails and position information for a physical place
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Location.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    Shortserverseitige, interne ID des Datensatzes
    Comments

    bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine id verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine idverfügen.

    Control0..1
    Typeid
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    4. Location.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Location.meta.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    8. Location.meta.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Location.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 10. Location.meta.versionId
      Definition

      The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

      ShortEindeutiger Name der serverseitigen Version des Datensatzes
      Comments

      Alle von einem Server bereitgestellten Ressourcen SOLLEN über eine versionID verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine versionIDverfügen.

      Control0..1
      Typeid
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Location.meta.lastUpdated
      Definition

      When the resource last changed - e.g. when the version changed.

      ShortZeitpunkt der letzten Änderung
      Comments

      Alle von einem Server bereitgestellten Ressourcen SOLLEN über ein lastUpdate verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über ein lastUpdateverfügen.

      Control0..1
      Typeinstant
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Location.meta.source
      Definition

      A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

      ShortIdentifies where the resource comes from
      Comments

      In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

      This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

      Control0..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Location.meta.profile
      Definition

      A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

      ShortProfiles this resource claims to conform to
      Comments

      It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

      Control0..*
      Typecanonical(StructureDefinition)
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Location.meta.security
      Definition

      Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

      ShortSecurity Labels applied to this resource
      Comments

      The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

      Control0..*
      BindingUnless not suitable, these codes SHALL be taken from All Security Labels
      (extensible to http://hl7.org/fhir/ValueSet/security-labels|4.0.1)

      Security Labels from the Healthcare Privacy and Security Classification System.

      TypeCoding
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Location.meta.tag
      Definition

      Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

      ShortTags applied to this resource
      Comments

      The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

      Control0..*
      BindingFor example codes, see CommonTags
      (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

      Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

      TypeCoding
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Location.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Location.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Location.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Location.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      30. Location.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Location.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      34. Location.identifier
      Definition

      Unique code or number identifying the location to its users.

      ShortEindeutiger Identifier des Standorts
      Comments

      Motivation: entspricht https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Organization label locations in registries, need to keep track of those.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Location.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ $this
      • 36. Location.identifier:standortnummer-dkg
        Slice Namestandortnummer-dkg
        Definition

        Unique code or number identifying the location to its users.

        ShortStandortnummer nach DKG
        Comments

        Motivation : Entsprechend der Festlegung der DKG laut Basisprofile-DE 1.5.0 (https://simplifier.net/packages/de.basisprofil.r4/)

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier(Identifier-Profil für die Standortnummer)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Organization label locations in registries, need to keep track of those.

        Pattern Value{
          "system" : "http://fhir.de/sid/dkgev/standortnummer"
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Location.status
        Definition

        The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

        Shortactive | suspended | inactive
        Control0..1
        BindingThe codes SHALL be taken from LocationStatus
        (required to http://hl7.org/fhir/ValueSet/location-status|4.0.1)

        Indicates whether the location is still in use.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Location.operationalStatus
        Definition

        The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

        ShortThe operational status of the location (typically only for a bed/room)
        Comments

        Motivation: Entsprechend der Bedarfsmeldung im Rahmen der AG zur Ausbaustufe 4 muss ein System den Belegungsstatus eines Raums zum Abruf bereitstellen, sofern diese Information verfügbar ist. Dies dient z.B. der Markierung als 'Isoliert'.

        Control0..1
        BindingThe codes SHALL be taken from hl7VS-bedStatus
        (required to http://terminology.hl7.org/ValueSet/v2-0116)
        TypeCoding
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Location.name
        Definition

        Name of the location as used by humans. Does not need to be unique.

        ShortName des Standort
        Comments

        Motivation: Kein Name zwingend notwendig (z.B. für ein Zimmer), wenn über .identifier identifizierbar; weicht daher ab von https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Location.alias
        Definition

        A list of alternate names that the location is known as, or was known as, in the past.

        ShortA list of alternate names that the location is known as, or was known as, in the past
        Comments

        There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

        Control0..*
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Requirements

        Over time locations and organizations go through many changes and can be known by different names.

        For searching knowing previous names that the location was known by can be very useful.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Location.description
        Definition

        Description of the Location, which helps in finding or referencing the place.

        ShortAdditional details about the location that could be displayed as further information to identify the location beyond its name
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Humans need additional information to verify a correct location has been identified.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Location.mode
        Definition

        Indicates whether a resource instance represents a specific location or a class of locations.

        ShortModus des Standorts
        Comments

        Motivation: Die Einschränkung auf "instance" erfolgt, da im ISiK-Kontext ausschließlich konkrete Standorte übertragen werden sollen. Hiermit wird zusätzlich die Kompatibilität zur MII-Spezifikation eines Standortes gewahrt https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location

        Control0..1
        BindingThe codes SHALL be taken from LocationMode
        (required to http://hl7.org/fhir/ValueSet/location-mode|4.0.1)

        Indicates whether a resource instance represents a specific location or a class of locations.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

        Pattern Valueinstance
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Location.type
        Definition

        Indicates the type of function performed at the location.

        ShortTyp des Standorts
        Comments

        Motivation: Ein System muss den Typ eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from ServiceDeliveryLocationRoleType
        (extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

        Indicates the type of function performed at the location.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Location.telecom
        Definition

        The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

        ShortContact details of the location
        Control0..*
        TypeContactPoint
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Location.address
        Definition

        Physical location.

        ShortAdresse des Standorts
        Comments

        Motivation: Bei Verfügbarkeit einer Adresse muss ein System diese Information bereitstellen. Darüber hinaus muss das abrufende System diese Information verarbeiten können.

        Control0..1
        TypeAddress(Adresse, deutsches Basisprofil)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        If locations can be visited, we need to keep track of their address.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Location.physicalType
        Definition

        Physical form of the location, e.g. building, room, vehicle, road.

        ShortPhysikalischer Typ des Standorts
        Comments

        Motivation: entspricht der MII Vorgabe - siehe https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location. Ein System muss den physikalischen Typ eines Standorts zum Abruf bereitstellen, da ansonsten der Typus des Standorts nicht maschinenlesbar definiert ist.

        Control1..1
        BindingFor example codes, see LocationType
        (example to http://hl7.org/fhir/ValueSet/location-physical-type|4.0.1)

        Physical form of the location.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        For purposes of showing relevant locations in queries, we need to categorize locations.

        Pattern Value{
          "coding" : [{
            "system" : "http://terminology.hl7.org/CodeSystem/location-physical-type",
            "code" : "ro",
            "display" : "Room"
          }]
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. Location.position
        Definition

        The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

        ShortGeodaten eines Standorts
        Comments

        Motivation: Ein System muss die Geodaten eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        For mobile applications and automated route-finding knowing the exact location of the Location is required.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. Location.position.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        62. Location.position.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        64. Location.position.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        66. Location.position.longitude
        Definition

        Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

        ShortLongitude with WGS84 datum
        Control1..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. Location.position.latitude
        Definition

        Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

        ShortLatitude with WGS84 datum
        Control1..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. Location.position.altitude
        Definition

        Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below).

        ShortAltitude with WGS84 datum
        Control0..1
        Typedecimal
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        72. Location.managingOrganization
        Definition

        The organization responsible for the provisioning and upkeep of the location.

        ShortVerwaltende Organisation des Standorts
        Comments

        Motivation: entspricht https://simplifier.net/medizininformatikinitiative-modulstrukturdaten/sd_mii_struktur_location

        Control1..1
        TypeReference(Organization)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Need to know who manages the location.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Location.partOf
        Definition

        Another Location of which this Location is physically a part of.

        ShortOrganisationale Zugehörigkeit
        Comments

        Motivation: Ein System muss die organisationale Zugehörigkeit eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

        Control0..1
        TypeReference(Location)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        For purposes of location, display and identification, knowing which locations are located within other locations is important.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. Location.hoursOfOperation
        Definition

        What days/times during a week is this location usually open.

        ShortBetriebszeiten des Standorts
        Comments

        Motivation: Ein System muss die Betriebszeiten eines Standorts zum Abruf bereitstellen, sofern diese Information verfügbar ist.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. Location.hoursOfOperation.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        80. Location.hoursOfOperation.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        82. Location.hoursOfOperation.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        84. Location.hoursOfOperation.daysOfWeek
        Definition

        Indicates which days of the week are available between the start and end Times.

        Shortmon | tue | wed | thu | fri | sat | sun
        Control0..*
        BindingThe codes SHALL be taken from DaysOfWeek
        (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

        The days of the week.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        86. Location.hoursOfOperation.allDay
        Definition

        The Location is open all day.

        ShortThe Location is open all day
        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        88. Location.hoursOfOperation.openingTime
        Definition

        Time that the Location opens.

        ShortTime that the Location opens
        Control0..1
        Typetime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. Location.hoursOfOperation.closingTime
        Definition

        Time that the Location closes.

        ShortTime that the Location closes
        Control0..1
        Typetime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        92. Location.availabilityExceptions
        Definition

        A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times.

        ShortDescription of availability exceptions
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. Location.endpoint
        Definition

        Technical endpoints providing access to services operated for the location.

        ShortTechnical endpoints providing access to services operated for the location
        Control0..*
        TypeReference(Endpoint)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))