| Active as of 2026-04-02 |
Definitions for the ISiKMedikament resource profile.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Medication | |
| Definition | This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use. |
| Short | Definition of a Medication |
| Control | 0..* |
| Is Modifier | false |
| Summary | false |
| Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) isik-med-1: Medikamenten-Code, -Bezeichnung oder Inhaltsstoffe müssen angegeben werden. ( code.exists() or ingredient.exists()) |
| 2. Medication.id | |
| Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
| Short | serverseitige, interne ID des DatensatzesLogical id of this artifact |
| Comments | bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine The only time that a resource does not have an id is when it is being submitted to the server using a create operation. |
| Control | 0..1 |
| Type | idstring |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| 4. Medication.implicitRules | |
| Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
| Short | Verweis auf die Regeln, nach denen die Ressource erstellt wurdeA set of rules under which this content was created |
| Comments | Begründung Constraint: In ISiK existiert kein Use-Case für dieses Element. Da es sich um ein Modifying Element handelt, wird es daher ausgeschlossen. Darüber hinaus werden die Regeln als URI vorgehalten. Dies führt dazu, dass sich hinter der URI eine beliebige Menge an Regeln befinden kann; wodurch nicht sichergestellt werden kann, dass alle Clients die Regeln korrekt interpretieren können. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
| Control | 0..01 |
| Type | uri |
| Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 6. Medication.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
| Summary | false |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 8. Medication.code | |
| Definition | A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems. |
| Short | Medikament in codierter Form oder ggf. als FreitextCodes that identify this medication |
| Comments | Begründung des Must-Support: grundlegende Information Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one). |
| Control | 0..1 |
| Binding | For example codes, see SNOMEDCTMedicationCodeshttp://hl7.org/fhir/ValueSet/medication-codes|4.0.1 (example to http://hl7.org/fhir/ValueSet/medication-codes|4.0.1)A coded concept that defines the type of a medication. |
| Type | CodeableConcept |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Medication.code.coding | |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Begründung des Must-Support: Medikamente MÜSSEN kodiert werden, hierfür kann eine PZN, ATC-Code oder SnomedCT Code verwendet werden Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..* |
| Type | Coding |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Medication.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Medication.code.coding:PZN | |
| Slice Name | PZN |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Merfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere PZN-Codes existieren können, bspw. existieren für Aspirin 3 verschiedene Packungsgrößen. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..* |
| Type | Coding(ISiKPZNCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 14. Medication.code.coding:ATC-DE | |
| Slice Name | ATC-DE |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Merfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere ATC-Codes existieren können, bspw. existieren für Aspirin 4 verschiedene Codes, je nachdem wofür das Medikament angewendet wird. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..* |
| Type | Coding(ISiKATCCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Medication.code.coding:SCT | |
| Slice Name | SCT |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..1* |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see TI Arzneimittel SNOMED CT ValueSet (extensible to https://gematik.de/fhir/terminology/ValueSet/ti-medication-snomed-ct-vs) |
| Type | Coding(ISiKSnomedCTCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Medication.code.text | |
| Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
| Short | Plain text representation of the concept |
| Comments | Begründung des Must-Support: Falls eine Kodierung nicht möglich ist kann das Medikament alternativ per Freitext erfasst werden Very often the text is the same as a displayName of one of the codings. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Medication.status | |
| Definition | A code to indicate if the medication is in active use. |
| Short | Status der Medikamenteninformationactive | inactive | entered-in-error |
| Comments | Begründung des Must-Support: Erforderliche Angabe im FHIR-Standard This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status. |
| Control | 10..1 |
| Binding | The codes SHALL be taken from Medication Status Codeshttp://hl7.org/fhir/ValueSet/medication-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/medication-status|4.0.1)A coded concept defining if the medication is in active use. |
| Type | code |
| Is Modifier | true because This element changes the interpretation of all descriptive attributes. |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Medication.manufacturer | |
| Definition | Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product. |
| Short | Hersteller des MedikamentsManufacturer of the item |
| Comments | Begründung des Must-Support: Alignment mit KBV-Profilen Hinweis: Hier kann der tatsächliche Hersteller des Medikaments benannt werden, vornehmlich im Fall von Wirkstoffmischungen (Rezepturen), beispielsweise die Krankenhausapotheke. Zu beachten ist, dass die zulassende Organisation, wie sie z.B. in den Daten zur PZN benannt ist, nicht als Hersteller gilt. |
| Control | 0..1 |
| Type | Reference(Organization) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Medication.manufacturer.display | |
| Definition | Plain text narrative that identifies the resource in addition to the resource reference. |
| Short | Text alternative for the resource |
| Comments | This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Medication.form | |
| Definition | Describes the form of the item. Powder; tablets; capsule. |
| Short | Abgabeformpowder | tablets | capsule + |
| Comments | Begründung des Must-Support: Basis-Information eines Medikaments When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form. |
| Control | 0..1 |
| Binding | For example codes, see SNOMEDCTFormCodeshttp://hl7.org/fhir/ValueSet/medication-form-codes|4.0.1 (example to http://hl7.org/fhir/ValueSet/medication-form-codes|4.0.1)A coded concept defining the form of a medication. |
| Type | CodeableConcept |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Medication.form.coding | |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Begründung des Must-Support: EDQM definiert eine einheitliche DoseForm auf europäischer Ebene Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..* |
| Type | Coding |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Medication.form.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 30. Medication.form.coding:EDQM | |
| Slice Name | EDQM |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..1* |
| Binding | The codes SHALL be taken from For codes, see Medicine EDQM Doseform - IPS ![]() (required to http://hl7.org/fhir/uv/ips/ValueSet/medicine-doseform) |
| Type | Coding(ISiKCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Medication.amount | |
| Definition | Specific amount of the drug in the packaged product. For example, when specifying a product that has the same strength (For example, Insulin glargine 100 unit per mL solution for injection), this attribute provides additional clarification of the package amount (For example, 3 mL, 10mL, etc.). |
| Short | MengeAmount of drug in package |
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein |
| Control | 0..1 |
| Type | Ratio |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Medication.amount.numerator | |
| Definition | The value of the numerator. |
| Short | Numerator value |
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein |
| Control | 10..1 |
| Type | Quantity(Medication Quantity) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Medication.amount.denominator | |
| Definition | The value of the denominator. |
| Short | Denominator value |
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein |
| Control | 10..1 |
| Type | Quantity(Medication Quantity) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 38. Medication.ingredient | |
| Definition | Identifies a particular constituent of interest in the product. |
| Short | Informationen zu Bestandteilen (Rezeptur)Active or inactive ingredient |
| Comments | Begründung des Must-Support: Wirkstoff-Rezepturen müssen dokumentierbar sein The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients. |
| Control | 0..* |
| Type | BackboneElement |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 40. Medication.ingredient.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | WirkstofftypAdditional content defined by implementations |
| Comments | Begründung des Must-Support: Alignment mit den MII-Profilen
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Medication.ingredient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Medication.ingredient.extension:wirkstofftyp | |
| Slice Name | wirkstofftyp |
| Definition | Optional Extension Element - found in all resources. |
| Short | Optional Extensions Element |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | Extension(ExtensionWirkstofftyp) (Extension Type: Coding) |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 44. Medication.ingredient.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 46. Medication.ingredient.item[x] | |
| Definition | The actual ingredient - either a substance (simple ingredient) or another medication of a medication. |
| Short | The actual ingredient or content |
| Control | 1..1 |
| Type | Choice of: CodeableConcept, Reference(Substance, Medication) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Requirements | The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base). |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 48. Medication.ingredient.item[x]:itemCodeableConcept | |
| Slice Name | itemCodeableConcept |
| Definition | The actual ingredient - either a substance (simple ingredient) or another medication of a medication. |
| Short | Bestandteil in codierter Form oder ggf. als FreitextThe actual ingredient or content |
| Comments | Begründung des Must-Support: Der Bestandteil muss eindeutig benannt sein |
| Control | 01..1 |
| Type | CodeableConcept, Reference(Substance, Medication) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Requirements | The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base). |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 50. Medication.ingredient.item[x]:itemCodeableConcept.coding | |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..* |
| Type | Coding |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x].coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Medication.ingredient.item[x]:itemCodeableConcept.coding:ASK | |
| Slice Name | ASK |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..1* |
| Type | Coding(ISiKASKCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Medication.ingredient.item[x]:itemCodeableConcept.coding:ATC-DE | |
| Slice Name | ATC-DE |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Mehrfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere ATC-Codes existieren können, z.B. existieren für Aspirin 4 verschiedene Codes, je nachdem wofür das Medikament angewendet wird. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..1* |
| Type | Coding(ISiKATCCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Medication.ingredient.item[x]:itemCodeableConcept.coding:PZN | |
| Slice Name | PZN |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Mehrfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere PZN-Codes existieren können, z.B. existieren für Aspirin 3 verschiedene Packungsgrößen. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..1* |
| Type | Coding(ISiKPZNCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 58. Medication.ingredient.item[x]:itemCodeableConcept.coding:SCT | |
| Slice Name | SCT |
| Definition | A reference to a code defined by a terminology system. |
| Short | Code defined by a terminology system |
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
| Control | 0..1* |
| Type | Coding(ISiKSnomedCTCoding) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 60. Medication.ingredient.item[x]:itemCodeableConcept.text | |
| Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
| Short | Plain text representation of the concept |
| Comments | Very often the text is the same as a displayName of one of the codings. |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Medication.ingredient.item[x]:itemReference | |
| Slice Name | itemReference |
| Definition | The actual ingredient - either a substance (simple ingredient) or another medication of a medication. |
| Short | Bestandteil (Referenz auf ein anderes Medikament)The actual ingredient or content |
| Comments | Begründung des Must-Support: Der Bestandteil muss eindeutig benannt sein |
| Control | 01..1 |
| Type | Reference(Substance, Medication, Substance, Medication), CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Must Support | true |
| Must Support Types | No must-support rules about the choice of types/profiles |
| Summary | false |
| Requirements | The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base). |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 64. Medication.ingredient.item[x]:itemReference.reference | |
| Definition | A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. |
| Short | Literal reference, Relative, internal or absolute URL |
| Comments | Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. |
| Control | 10..1 This element is affected by the following invariants: ref-1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Medication.ingredient.isActive | |
| Definition | Indication of whether this ingredient affects the therapeutic action of the drug. |
| Short | handelt es sich um einen aktiven Bestandteil?Active ingredient indicator |
| Comments | Begründung des Must-Support: Wird eine vollständige Rezeptur dokumentiert, muss erkennbar sein, welches die Wirkstoffe sind |
| Control | 0..1 |
| Type | boolean |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | false |
| Requirements | True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive). |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Medication.ingredient.strength | |
| Definition | Specifies how many (or how much) of the items there are in this Medication. For example, 250 mg per tablet. This is expressed as a ratio where the numerator is 250mg and the denominator is 1 tablet. |
| Short | StärkeQuantity of ingredient present |
| Comments | Begründung des Must-Support: Basisinformation in Rezepturen |
| Control | 0..1 |
| Type | Ratio |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 70. Medication.ingredient.strength.numerator | |
| Definition | The value of the numerator. |
| Short | Numerator value |
| Control | 10..1 |
| Type | Quantity(Medication Quantity) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 72. Medication.ingredient.strength.denominator | |
| Definition | The value of the denominator. |
| Short | Denominator value |
| Control | 10..1 |
| Type | Quantity(Medication Quantity) |
| Is Modifier | false |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 74. Medication.batch | |
| Definition | Information that only applies to packages (not products). |
| Short | Angaben zur ChargeDetails about packaged medications |
| Comments | Begründung des Must-Support: erforderlich zur Dokumentation der Chargennummer Hinweis: Bitte beachten Sie gegebenenfalls die Regelungen der zwischen GKV-SV und DAV: https://www.gkv-datenaustausch.de/leistungserbringer/apotheken/apotheken.jsp . Insbesondere den Technischen Anhang 7 (TA7) zur Arzneimittelabrechnungsvereinbarung gemäß § 300 Absatz 3 SGB V in der aktuellsten Fassung. |
| Control | 0..1 |
| Type | BackboneElement |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Medication.batch.modifierExtension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
| Short | Extensions that cannot be ignored even if unrecognized |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
| Summary | true |
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
| Alternate Names | extensions, user content, modifiers |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 78. Medication.batch.lotNumber | |
| Definition | The assigned lot number of a batch of the specified product. |
| Short | ChargennummerIdentifier assigned to batch |
| Comments | Begründung des Must-Support: Therapiesicherheit und Nachvollziehbarkeit
|
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Medication | |
| Invariants | isik-med-1: Medikamenten-Code, -Bezeichnung oder Inhaltsstoffe müssen angegeben werden. (code.exists() or ingredient.exists()) |
| 2. Medication.id | |
| Short | serverseitige, interne ID des Datensatzes |
| Comments | bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine |
| Must Support | true |
| 4. Medication.meta | |
| 6. Medication.meta.versionId | |
| Short | Eindeutiger Name der serverseitigen Version des Datensatzes |
| Comments | Alle von einem Server bereitgestellten Ressourcen SOLLEN über eine |
| 8. Medication.meta.lastUpdated | |
| Short | Zeitpunkt der letzten Änderung |
| Comments | Alle von einem Server bereitgestellten Ressourcen SOLLEN über ein |
| 10. Medication.implicitRules | |
| Short | Verweis auf die Regeln, nach denen die Ressource erstellt wurde |
| Comments | Begründung Constraint: In ISiK existiert kein Use-Case für dieses Element. Da es sich um ein Modifying Element handelt, wird es daher ausgeschlossen. Darüber hinaus werden die Regeln als URI vorgehalten. Dies führt dazu, dass sich hinter der URI eine beliebige Menge an Regeln befinden kann; wodurch nicht sichergestellt werden kann, dass alle Clients die Regeln korrekt interpretieren können. |
| Control | 0..0 |
| 12. Medication.code | |
| Short | Medikament in codierter Form oder ggf. als Freitext |
| Comments | Begründung des Must-Support: grundlegende Information |
| Must Support | true |
| 14. Medication.code.coding | |
| Comments | Begründung des Must-Support: Medikamente MÜSSEN kodiert werden, hierfür kann eine PZN, ATC-Code oder SnomedCT Code verwendet werden |
| Must Support | true |
| Slicing | This element introduces a set of slices on Medication.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Medication.code.coding:PZN | |
| Slice Name | PZN |
| Comments | Merfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere PZN-Codes existieren können, bspw. existieren für Aspirin 3 verschiedene Packungsgrößen. |
| Control | 0..* |
| Type | Coding(ISiKPZNCoding) |
| Must Support | true |
| Pattern Value | { |
| 18. Medication.code.coding:ATC-DE | |
| Slice Name | ATC-DE |
| Comments | Merfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere ATC-Codes existieren können, bspw. existieren für Aspirin 4 verschiedene Codes, je nachdem wofür das Medikament angewendet wird. |
| Control | 0..* |
| Type | Coding(ISiKATCCoding) |
| Must Support | true |
| Pattern Value | { |
| 20. Medication.code.coding:SCT | |
| Slice Name | SCT |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from TI Arzneimittel SNOMED CT ValueSet (extensible to https://gematik.de/fhir/terminology/ValueSet/ti-medication-snomed-ct-vs) |
| Type | Coding(ISiKSnomedCTCoding) |
| Must Support | true |
| Pattern Value | { |
| 22. Medication.code.text | |
| Comments | Begründung des Must-Support: Falls eine Kodierung nicht möglich ist kann das Medikament alternativ per Freitext erfasst werden |
| Must Support | true |
| 24. Medication.status | |
| Short | Status der Medikamenteninformation |
| Comments | Begründung des Must-Support: Erforderliche Angabe im FHIR-Standard |
| Control | 1..? |
| Must Support | true |
| 26. Medication.manufacturer | |
| Short | Hersteller des Medikaments |
| Comments | Begründung des Must-Support: Alignment mit KBV-Profilen Hinweis: Hier kann der tatsächliche Hersteller des Medikaments benannt werden, vornehmlich im Fall von Wirkstoffmischungen (Rezepturen), beispielsweise die Krankenhausapotheke. Zu beachten ist, dass die zulassende Organisation, wie sie z.B. in den Daten zur PZN benannt ist, nicht als Hersteller gilt. |
| Must Support | true |
| 28. Medication.manufacturer.display | |
| Control | 1..? |
| Must Support | true |
| 30. Medication.form | |
| Short | Abgabeform |
| Comments | Begründung des Must-Support: Basis-Information eines Medikaments |
| Must Support | true |
| 32. Medication.form.coding | |
| Comments | Begründung des Must-Support: EDQM definiert eine einheitliche DoseForm auf europäischer Ebene |
| Must Support | true |
| Slicing | This element introduces a set of slices on Medication.form.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 34. Medication.form.coding:EDQM | |
| Slice Name | EDQM |
| Control | 0..1 |
| Binding | The codes SHALL be taken from Medicine EDQM Doseform - IPS ![]() (required to http://hl7.org/fhir/uv/ips/ValueSet/medicine-doseform) |
| Type | Coding(ISiKCoding) |
| Must Support | true |
| 36. Medication.amount | |
| Short | Menge |
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein |
| Must Support | true |
| 38. Medication.amount.numerator | |
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein |
| Control | 1..? |
| Type | Quantity(Medication Quantity) |
| Must Support | true |
| 40. Medication.amount.denominator | |
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein |
| Control | 1..? |
| Type | Quantity(Medication Quantity) |
| Must Support | true |
| 42. Medication.ingredient | |
| Short | Informationen zu Bestandteilen (Rezeptur) |
| Comments | Begründung des Must-Support: Wirkstoff-Rezepturen müssen dokumentierbar sein |
| Must Support | true |
| 44. Medication.ingredient.extension | |
| Short | Wirkstofftyp |
| Comments | Begründung des Must-Support: Alignment mit den MII-Profilen
|
| Must Support | true |
| Slicing | This element introduces a set of slices on Medication.ingredient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 46. Medication.ingredient.extension:wirkstofftyp | |
| Slice Name | wirkstofftyp |
| Control | 0..1 |
| Type | Extension(ExtensionWirkstofftyp) (Extension Type: Coding) |
| Must Support | true |
| 48. Medication.ingredient.item[x] | |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 50. Medication.ingredient.item[x]:itemCodeableConcept | |
| Slice Name | itemCodeableConcept |
| Short | Bestandteil in codierter Form oder ggf. als Freitext |
| Comments | Begründung des Must-Support: Der Bestandteil muss eindeutig benannt sein |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Must Support | true |
| 52. Medication.ingredient.item[x]:itemCodeableConcept.coding | |
| Must Support | true |
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x].coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 54. Medication.ingredient.item[x]:itemCodeableConcept.coding:ASK | |
| Slice Name | ASK |
| Control | 0..1 |
| Type | Coding(ISiKASKCoding) |
| Must Support | true |
| Pattern Value | { |
| 56. Medication.ingredient.item[x]:itemCodeableConcept.coding:ATC-DE | |
| Slice Name | ATC-DE |
| Comments | Mehrfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere ATC-Codes existieren können, z.B. existieren für Aspirin 4 verschiedene Codes, je nachdem wofür das Medikament angewendet wird. |
| Control | 0..1 |
| Type | Coding(ISiKATCCoding) |
| Must Support | true |
| Pattern Value | { |
| 58. Medication.ingredient.item[x]:itemCodeableConcept.coding:PZN | |
| Slice Name | PZN |
| Comments | Mehrfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere PZN-Codes existieren können, z.B. existieren für Aspirin 3 verschiedene Packungsgrößen. |
| Control | 0..1 |
| Type | Coding(ISiKPZNCoding) |
| Must Support | true |
| Pattern Value | { |
| 60. Medication.ingredient.item[x]:itemCodeableConcept.coding:SCT | |
| Slice Name | SCT |
| Control | 0..1 |
| Type | Coding(ISiKSnomedCTCoding) |
| Must Support | true |
| Pattern Value | { |
| 62. Medication.ingredient.item[x]:itemCodeableConcept.text | |
| Must Support | true |
| 64. Medication.ingredient.item[x]:itemReference | |
| Slice Name | itemReference |
| Short | Bestandteil (Referenz auf ein anderes Medikament) |
| Comments | Begründung des Must-Support: Der Bestandteil muss eindeutig benannt sein |
| Control | 0..1 |
| Type | Reference(Substance, Medication) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Must Support | true |
| Must Support Types | No must-support rules about the choice of types/profiles |
| 66. Medication.ingredient.item[x]:itemReference.reference | |
| Control | 1..? |
| Must Support | true |
| 68. Medication.ingredient.isActive | |
| Short | handelt es sich um einen aktiven Bestandteil? |
| Comments | Begründung des Must-Support: Wird eine vollständige Rezeptur dokumentiert, muss erkennbar sein, welches die Wirkstoffe sind |
| Must Support | true |
| 70. Medication.ingredient.strength | |
| Short | Stärke |
| Comments | Begründung des Must-Support: Basisinformation in Rezepturen |
| Must Support | true |
| 72. Medication.ingredient.strength.numerator | |
| Control | 1..? |
| Type | Quantity(Medication Quantity) |
| Must Support | true |
| 74. Medication.ingredient.strength.denominator | |
| Control | 1..? |
| Type | Quantity(Medication Quantity) |
| Must Support | true |
| 76. Medication.batch | |
| Short | Angaben zur Charge |
| Comments | Begründung des Must-Support: erforderlich zur Dokumentation der Chargennummer Hinweis: Bitte beachten Sie gegebenenfalls die Regelungen der zwischen GKV-SV und DAV: https://www.gkv-datenaustausch.de/leistungserbringer/apotheken/apotheken.jsp . Insbesondere den Technischen Anhang 7 (TA7) zur Arzneimittelabrechnungsvereinbarung gemäß § 300 Absatz 3 SGB V in der aktuellsten Fassung. |
| Must Support | true |
| 78. Medication.batch.lotNumber | |
| Short | Chargennummer |
| Comments | Begründung des Must-Support: Therapiesicherheit und Nachvollziehbarkeit
|
| Must Support | true |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Medication | |||||
| Definition | This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use. | ||||
| Short | Definition of a Medication | ||||
| Control | 0..* | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty())dom-6: A resource should have narrative for robust management ( text.`div`.exists())isik-med-1: Medikamenten-Code, -Bezeichnung oder Inhaltsstoffe müssen angegeben werden. ( code.exists() or ingredient.exists()) | ||||
| 2. Medication.id | |||||
| Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
| Short | serverseitige, interne ID des Datensatzes | ||||
| Comments | bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine | ||||
| Control | 0..1 | ||||
| Type | id | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| 4. Medication.meta | |||||
| Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
| Short | Metadata about the resource | ||||
| Control | 0..1 | ||||
| Type | Meta | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 6. Medication.meta.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 8. Medication.meta.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 10. Medication.meta.versionId | |||||
| Definition | The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. | ||||
| Short | Eindeutiger Name der serverseitigen Version des Datensatzes | ||||
| Comments | Alle von einem Server bereitgestellten Ressourcen SOLLEN über eine | ||||
| Control | 0..1 | ||||
| Type | id | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 12. Medication.meta.lastUpdated | |||||
| Definition | When the resource last changed - e.g. when the version changed. | ||||
| Short | Zeitpunkt der letzten Änderung | ||||
| Comments | Alle von einem Server bereitgestellten Ressourcen SOLLEN über ein | ||||
| Control | 0..1 | ||||
| Type | instant | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 14. Medication.meta.source | |||||
| Definition | A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. | ||||
| Short | Identifies where the resource comes from | ||||
| Comments | In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. | ||||
| Control | 0..1 | ||||
| Type | uri | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 16. Medication.meta.profile | |||||
| Definition | A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. | ||||
| Short | Profiles this resource claims to conform to | ||||
| Comments | It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. | ||||
| Control | 0..* | ||||
| Type | canonical(StructureDefinition) | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 18. Medication.meta.security | |||||
| Definition | Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. | ||||
| Short | Security Labels applied to this resource | ||||
| Comments | The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. | ||||
| Control | 0..* | ||||
| Binding | Unless not suitable, these codes SHALL be taken from All Security Labels (extensible to http://hl7.org/fhir/ValueSet/security-labels|4.0.1)Security Labels from the Healthcare Privacy and Security Classification System. | ||||
| Type | Coding | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 20. Medication.meta.tag | |||||
| Definition | Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. | ||||
| Short | Tags applied to this resource | ||||
| Comments | The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. | ||||
| Control | 0..* | ||||
| Binding | For example codes, see CommonTags (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones". | ||||
| Type | Coding | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 22. Medication.implicitRules | |||||
| Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
| Short | Verweis auf die Regeln, nach denen die Ressource erstellt wurde | ||||
| Comments | Begründung Constraint: In ISiK existiert kein Use-Case für dieses Element. Da es sich um ein Modifying Element handelt, wird es daher ausgeschlossen. Darüber hinaus werden die Regeln als URI vorgehalten. Dies führt dazu, dass sich hinter der URI eine beliebige Menge an Regeln befinden kann; wodurch nicht sichergestellt werden kann, dass alle Clients die Regeln korrekt interpretieren können. | ||||
| Control | 0..0 | ||||
| Type | uri | ||||
| Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 24. Medication.language | |||||
| Definition | The base language in which the resource is written. | ||||
| Short | Language of the resource content | ||||
| Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
| Control | 0..1 | ||||
| Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)A human language.
| ||||
| Type | code | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 26. Medication.text | |||||
| Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
| Short | Text summary of the resource, for human interpretation | ||||
| Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
| Control | 0..1 | ||||
| Type | Narrative | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | narrative, html, xhtml, display | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 28. Medication.contained | |||||
| Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
| Short | Contained, inline Resources | ||||
| Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
| Control | 0..* | ||||
| Type | Resource | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | inline resources, anonymous resources, contained resources | ||||
| 30. Medication.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 32. Medication.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
| Summary | false | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 34. Medication.identifier | |||||
| Definition | Business identifier for this medication. | ||||
| Short | Business identifier for this medication | ||||
| Comments | The serial number could be included as an identifier. | ||||
| Note | This is a business identifier, not a resource identifier (see discussion) | ||||
| Control | 0..* | ||||
| Type | Identifier | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 36. Medication.code | |||||
| Definition | A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems. | ||||
| Short | Medikament in codierter Form oder ggf. als Freitext | ||||
| Comments | Begründung des Must-Support: grundlegende Information | ||||
| Control | 0..1 | ||||
| Binding | For example codes, see SNOMEDCTMedicationCodes (example to http://hl7.org/fhir/ValueSet/medication-codes|4.0.1)A coded concept that defines the type of a medication. | ||||
| Type | CodeableConcept | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 38. Medication.code.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 40. Medication.code.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 42. Medication.code.coding | |||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Begründung des Must-Support: Medikamente MÜSSEN kodiert werden, hierfür kann eine PZN, ATC-Code oder SnomedCT Code verwendet werden | ||||
| Control | 0..* | ||||
| Type | Coding | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Medication.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 44. Medication.code.coding:PZN | |||||
| Slice Name | PZN | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Merfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere PZN-Codes existieren können, bspw. existieren für Aspirin 3 verschiedene Packungsgrößen. | ||||
| Control | 0..* | ||||
| Type | Coding(ISiKPZNCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 46. Medication.code.coding:ATC-DE | |||||
| Slice Name | ATC-DE | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Merfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere ATC-Codes existieren können, bspw. existieren für Aspirin 4 verschiedene Codes, je nachdem wofür das Medikament angewendet wird. | ||||
| Control | 0..* | ||||
| Type | Coding(ISiKATCCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 48. Medication.code.coding:SCT | |||||
| Slice Name | SCT | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
| Control | 0..1 | ||||
| Binding | Unless not suitable, these codes SHALL be taken from TI Arzneimittel SNOMED CT ValueSet (extensible to https://gematik.de/fhir/terminology/ValueSet/ti-medication-snomed-ct-vs) | ||||
| Type | Coding(ISiKSnomedCTCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 50. Medication.code.text | |||||
| Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. | ||||
| Short | Plain text representation of the concept | ||||
| Comments | Begründung des Must-Support: Falls eine Kodierung nicht möglich ist kann das Medikament alternativ per Freitext erfasst werden | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 52. Medication.status | |||||
| Definition | A code to indicate if the medication is in active use. | ||||
| Short | Status der Medikamenteninformation | ||||
| Comments | Begründung des Must-Support: Erforderliche Angabe im FHIR-Standard | ||||
| Control | 1..1 | ||||
| Binding | The codes SHALL be taken from Medication Status Codes (required to http://hl7.org/fhir/ValueSet/medication-status|4.0.1)A coded concept defining if the medication is in active use. | ||||
| Type | code | ||||
| Is Modifier | true because This element changes the interpretation of all descriptive attributes. | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 54. Medication.manufacturer | |||||
| Definition | Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product. | ||||
| Short | Hersteller des Medikaments | ||||
| Comments | Begründung des Must-Support: Alignment mit KBV-Profilen Hinweis: Hier kann der tatsächliche Hersteller des Medikaments benannt werden, vornehmlich im Fall von Wirkstoffmischungen (Rezepturen), beispielsweise die Krankenhausapotheke. Zu beachten ist, dass die zulassende Organisation, wie sie z.B. in den Daten zur PZN benannt ist, nicht als Hersteller gilt. | ||||
| Control | 0..1 | ||||
| Type | Reference(Organization) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 56. Medication.manufacturer.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 58. Medication.manufacturer.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.manufacturer.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 60. Medication.manufacturer.reference | |||||
| Definition | A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. | ||||
| Short | Literal reference, Relative, internal or absolute URL | ||||
| Comments | Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. | ||||
| Control | 0..1 This element is affected by the following invariants: ref-1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 62. Medication.manufacturer.type | |||||
| Definition | The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). | ||||
| Short | Type the reference refers to (e.g. "Patient") | ||||
| Comments | This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. | ||||
| Control | 0..1 | ||||
| Binding | Unless not suitable, these codes SHALL be taken from ResourceType (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)Aa resource (or, for logical models, the URI of the logical model). | ||||
| Type | uri | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 64. Medication.manufacturer.identifier | |||||
| Definition | An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. | ||||
| Short | Logical reference, when literal reference is not known | ||||
| Comments | When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). | ||||
| Note | This is a business identifier, not a resource identifier (see discussion) | ||||
| Control | 0..1 | ||||
| Type | Identifier | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 66. Medication.manufacturer.display | |||||
| Definition | Plain text narrative that identifies the resource in addition to the resource reference. | ||||
| Short | Text alternative for the resource | ||||
| Comments | This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. | ||||
| Control | 1..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 68. Medication.form | |||||
| Definition | Describes the form of the item. Powder; tablets; capsule. | ||||
| Short | Abgabeform | ||||
| Comments | Begründung des Must-Support: Basis-Information eines Medikaments | ||||
| Control | 0..1 | ||||
| Binding | For example codes, see SNOMEDCTFormCodes (example to http://hl7.org/fhir/ValueSet/medication-form-codes|4.0.1)A coded concept defining the form of a medication. | ||||
| Type | CodeableConcept | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 70. Medication.form.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 72. Medication.form.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.form.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 74. Medication.form.coding | |||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Begründung des Must-Support: EDQM definiert eine einheitliche DoseForm auf europäischer Ebene | ||||
| Control | 0..* | ||||
| Type | Coding | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Medication.form.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 76. Medication.form.coding:EDQM | |||||
| Slice Name | EDQM | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
| Control | 0..1 | ||||
| Binding | The codes SHALL be taken from Medicine EDQM Doseform - IPS ![]() (required to http://hl7.org/fhir/uv/ips/ValueSet/medicine-doseform) | ||||
| Type | Coding(ISiKCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 78. Medication.form.text | |||||
| Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. | ||||
| Short | Plain text representation of the concept | ||||
| Comments | Very often the text is the same as a displayName of one of the codings. | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 80. Medication.amount | |||||
| Definition | Specific amount of the drug in the packaged product. For example, when specifying a product that has the same strength (For example, Insulin glargine 100 unit per mL solution for injection), this attribute provides additional clarification of the package amount (For example, 3 mL, 10mL, etc.). | ||||
| Short | Menge | ||||
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein | ||||
| Control | 0..1 | ||||
| Type | Ratio | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 82. Medication.amount.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 84. Medication.amount.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.amount.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 86. Medication.amount.numerator | |||||
| Definition | The value of the numerator. | ||||
| Short | Numerator value | ||||
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein | ||||
| Control | 1..1 | ||||
| Type | Quantity(Medication Quantity) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 88. Medication.amount.denominator | |||||
| Definition | The value of the denominator. | ||||
| Short | Denominator value | ||||
| Comments | Begründung des Must-Support: Bei einer Medikation MUSS die Menge dokumentierbar sein | ||||
| Control | 1..1 | ||||
| Type | Quantity(Medication Quantity) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 90. Medication.ingredient | |||||
| Definition | Identifies a particular constituent of interest in the product. | ||||
| Short | Informationen zu Bestandteilen (Rezeptur) | ||||
| Comments | Begründung des Must-Support: Wirkstoff-Rezepturen müssen dokumentierbar sein | ||||
| Control | 0..* | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 92. Medication.ingredient.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 94. Medication.ingredient.extension | |||||
| Definition | An Extension | ||||
| Short | Wirkstofftyp | ||||
| Comments | Begründung des Must-Support: Alignment mit den MII-Profilen
| ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.ingredient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 96. Medication.ingredient.extension:wirkstofftyp | |||||
| Slice Name | wirkstofftyp | ||||
| Definition | Optional Extension Element - found in all resources. | ||||
| Short | Optional Extensions Element | ||||
| Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
| Type | Extension(ExtensionWirkstofftyp) (Extension Type: Coding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 98. Medication.ingredient.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 100. Medication.ingredient.item[x] | |||||
| Definition | The actual ingredient - either a substance (simple ingredient) or another medication of a medication. | ||||
| Short | The actual ingredient or content | ||||
| Control | 1..1 | ||||
| Type | Choice of: CodeableConcept, Reference(Substance, Medication) | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Requirements | The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base). | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: | ||||
| 102. Medication.ingredient.item[x]:itemCodeableConcept | |||||
| Slice Name | itemCodeableConcept | ||||
| Definition | The actual ingredient - either a substance (simple ingredient) or another medication of a medication. | ||||
| Short | Bestandteil in codierter Form oder ggf. als Freitext | ||||
| Comments | Begründung des Must-Support: Der Bestandteil muss eindeutig benannt sein | ||||
| Control | 0..1 | ||||
| Type | CodeableConcept | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Requirements | The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base). | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 104. Medication.ingredient.item[x]:itemCodeableConcept.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 106. Medication.ingredient.item[x]:itemCodeableConcept.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 108. Medication.ingredient.item[x]:itemCodeableConcept.coding | |||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
| Control | 0..* | ||||
| Type | Coding | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x].coding. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 110. Medication.ingredient.item[x]:itemCodeableConcept.coding:ASK | |||||
| Slice Name | ASK | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
| Control | 0..1 | ||||
| Type | Coding(ISiKASKCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 112. Medication.ingredient.item[x]:itemCodeableConcept.coding:ATC-DE | |||||
| Slice Name | ATC-DE | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Mehrfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere ATC-Codes existieren können, z.B. existieren für Aspirin 4 verschiedene Codes, je nachdem wofür das Medikament angewendet wird. | ||||
| Control | 0..1 | ||||
| Type | Coding(ISiKATCCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 114. Medication.ingredient.item[x]:itemCodeableConcept.coding:PZN | |||||
| Slice Name | PZN | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Mehrfachcodierung ist zulässig, da für ein abstraktes Medikament auch mehrere PZN-Codes existieren können, z.B. existieren für Aspirin 3 verschiedene Packungsgrößen. | ||||
| Control | 0..1 | ||||
| Type | Coding(ISiKPZNCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 116. Medication.ingredient.item[x]:itemCodeableConcept.coding:SCT | |||||
| Slice Name | SCT | ||||
| Definition | A reference to a code defined by a terminology system. | ||||
| Short | Code defined by a terminology system | ||||
| Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
| Control | 0..1 | ||||
| Type | Coding(ISiKSnomedCTCoding) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
| Pattern Value | { | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 118. Medication.ingredient.item[x]:itemCodeableConcept.text | |||||
| Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. | ||||
| Short | Plain text representation of the concept | ||||
| Comments | Very often the text is the same as a displayName of one of the codings. | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 120. Medication.ingredient.item[x]:itemReference | |||||
| Slice Name | itemReference | ||||
| Definition | The actual ingredient - either a substance (simple ingredient) or another medication of a medication. | ||||
| Short | Bestandteil (Referenz auf ein anderes Medikament) | ||||
| Comments | Begründung des Must-Support: Der Bestandteil muss eindeutig benannt sein | ||||
| Control | 0..1 | ||||
| Type | Reference(Substance, Medication) | ||||
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Must Support Types | No must-support rules about the choice of types/profiles | ||||
| Summary | false | ||||
| Requirements | The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base). | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 122. Medication.ingredient.item[x]:itemReference.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 124. Medication.ingredient.item[x]:itemReference.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.ingredient.item[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 126. Medication.ingredient.item[x]:itemReference.reference | |||||
| Definition | A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. | ||||
| Short | Literal reference, Relative, internal or absolute URL | ||||
| Comments | Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. | ||||
| Control | 1..1 This element is affected by the following invariants: ref-1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 128. Medication.ingredient.item[x]:itemReference.type | |||||
| Definition | The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). | ||||
| Short | Type the reference refers to (e.g. "Patient") | ||||
| Comments | This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. | ||||
| Control | 0..1 | ||||
| Binding | Unless not suitable, these codes SHALL be taken from ResourceType (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)Aa resource (or, for logical models, the URI of the logical model). | ||||
| Type | uri | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 130. Medication.ingredient.item[x]:itemReference.identifier | |||||
| Definition | An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. | ||||
| Short | Logical reference, when literal reference is not known | ||||
| Comments | When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). | ||||
| Note | This is a business identifier, not a resource identifier (see discussion) | ||||
| Control | 0..1 | ||||
| Type | Identifier | ||||
| Is Modifier | false | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 132. Medication.ingredient.item[x]:itemReference.display | |||||
| Definition | Plain text narrative that identifies the resource in addition to the resource reference. | ||||
| Short | Text alternative for the resource | ||||
| Comments | This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 134. Medication.ingredient.isActive | |||||
| Definition | Indication of whether this ingredient affects the therapeutic action of the drug. | ||||
| Short | handelt es sich um einen aktiven Bestandteil? | ||||
| Comments | Begründung des Must-Support: Wird eine vollständige Rezeptur dokumentiert, muss erkennbar sein, welches die Wirkstoffe sind | ||||
| Control | 0..1 | ||||
| Type | boolean | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Requirements | True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive). | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 136. Medication.ingredient.strength | |||||
| Definition | Specifies how many (or how much) of the items there are in this Medication. For example, 250 mg per tablet. This is expressed as a ratio where the numerator is 250mg and the denominator is 1 tablet. | ||||
| Short | Stärke | ||||
| Comments | Begründung des Must-Support: Basisinformation in Rezepturen | ||||
| Control | 0..1 | ||||
| Type | Ratio | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 138. Medication.ingredient.strength.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 140. Medication.ingredient.strength.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| Slicing | This element introduces a set of slices on Medication.ingredient.strength.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
| 142. Medication.ingredient.strength.numerator | |||||
| Definition | The value of the numerator. | ||||
| Short | Numerator value | ||||
| Control | 1..1 | ||||
| Type | Quantity(Medication Quantity) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 144. Medication.ingredient.strength.denominator | |||||
| Definition | The value of the denominator. | ||||
| Short | Denominator value | ||||
| Control | 1..1 | ||||
| Type | Quantity(Medication Quantity) | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | true | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 146. Medication.batch | |||||
| Definition | Information that only applies to packages (not products). | ||||
| Short | Angaben zur Charge | ||||
| Comments | Begründung des Must-Support: erforderlich zur Dokumentation der Chargennummer Hinweis: Bitte beachten Sie gegebenenfalls die Regelungen der zwischen GKV-SV und DAV: https://www.gkv-datenaustausch.de/leistungserbringer/apotheken/apotheken.jsp . Insbesondere den Technischen Anhang 7 (TA7) zur Arzneimittelabrechnungsvereinbarung gemäß § 300 Absatz 3 SGB V in der aktuellsten Fassung. | ||||
| Control | 0..1 | ||||
| Type | BackboneElement | ||||
| Is Modifier | false | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 148. Medication.batch.id | |||||
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
| Short | Unique id for inter-element referencing | ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| XML Format | In the XML format, this property is represented as an attribute. | ||||
| Summary | false | ||||
| 150. Medication.batch.extension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
| Short | Additional content defined by implementations | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | false | ||||
| Summary | false | ||||
| Alternate Names | extensions, user content | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 152. Medication.batch.modifierExtension | |||||
| Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
| Short | Extensions that cannot be ignored even if unrecognized | ||||
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
| Control | 0..* | ||||
| Type | Extension | ||||
| Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
| Summary | true | ||||
| Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
| Alternate Names | extensions, user content, modifiers | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) | ||||
| 154. Medication.batch.lotNumber | |||||
| Definition | The assigned lot number of a batch of the specified product. | ||||
| Short | Chargennummer | ||||
| Comments | Begründung des Must-Support: Therapiesicherheit und Nachvollziehbarkeit
| ||||
| Control | 0..1 | ||||
| Type | string | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Must Support | true | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||
| 156. Medication.batch.expirationDate | |||||
| Definition | When this specific batch of product will expire. | ||||
| Short | When batch will expire | ||||
| Control | 0..1 | ||||
| Type | dateTime | ||||
| Is Modifier | false | ||||
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
| Summary | false | ||||
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) | ||||