ISiK Basis Implementierungsleitfaden
Version 6.0.0-rc - ci-build

Resource Profile: ISiKProzedur - Detailed Descriptions

Active as of 2025-12-17

Definitions for the ISiKProzedur resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Procedure
Definition

An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

ShortAn action that is being or was performed on a patient
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
proc-ISiK-1: Falls die Prozedur per OPS kodiert wird, MUSS eine SNOMED-CT kodierte Category abgebildet werden (code.coding.where(system = 'http://fhir.de/CodeSystem/bfarm/ops').exists() implies category.coding.where(system = 'http://snomed.info/sct').exists())
proc-ISiK-2: Falls eine codierte Prozedur vorliegt MUSS eine kodierte Category abgebildet werden (code.coding.exists() implies category.coding.exists())
2. Procedure.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Shortserverseitige, interne ID des DatensatzesLogical id of this artifact
Comments

bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine id verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine idverfügen.


The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeidstring
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Procedure.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Procedure.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Procedure.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. Procedure.extension:Dokumentationsdatum
    Slice NameDokumentationsdatum
    Definition

    Dokumentationsdatum der Prozedur, falls abweichend vom Durchführungsdatum

    ShortDokumentationsdatum
    Comments

    Datum, an dem die Prozedur dokumentiert wurde.
    Es handelt sich hierbei um das fachliche Dokumentationsdatum, nicht zu verwechseln mit dem Datum der technischen Anlage des Datensatzes im Primärsystem. Diese beiden Daten können jedoch identisch sein.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(ExtensionProzedurDokumentationsdatum) (Extension Type: dateTime)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Procedure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Procedure.status
    Definition

    A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

    ShortStatuspreparation | in-progress | not-done | on-hold | stopped | completed | entered-in-error | unknown
    Comments

    Zeigt den aktuellen Status der Prozedur an.
    **WICHTIGER Hinweis für Implementierer:

    • Alle server-seitigen Implementierungen MÜSSEN in der Lage sein, die systemintern möglichen Statuswerte korrekt in FHIR abzubilden, mindestens jedoch die Werte completed und unknown.
    • Alle client-seitigen Implementierungen MÜSSEN in der Lage sein, sämtliche Status-Codes zu interpretieren und dem Anwender in angemessener Form darstellen zu können, beispielsweise durch Ausblenden/Durchstreichen von Prozeduren mit dem status entered-in-error und Ausgrauen von Prozeduren, die noch nicht stattgefunden haben, o.ä.

    The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from EventStatushttp://hl7.org/fhir/ValueSet/event-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/event-status|4.0.1)

    A code specifying the state of the procedure.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Procedure.category
    Definition

    A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

    ShortKategorieClassification of the procedure
    Comments

    Die Kategorisierung erfolgt vorzugsweise auf Basis von SNOMED CT. Für OPS-codierte Prozeduren MUSS die Kategorie angegeben werden: Sie kann ermittelt werden, indem das erste Zeichen des OPS-Codes mit Hilfe einer ConceptMap auf die zutreffende SNOMED-Kategorie gemappt wird.

    Begründung MS: Die Kategorisierung dient der Verbesserung von Suche und Darstellung.

    Control0..1
    BindingFor example codes, see ProcedureCategoryCodes(SNOMEDCT)http://hl7.org/fhir/ValueSet/procedure-category|4.0.1
    (example to http://hl7.org/fhir/ValueSet/procedure-category|4.0.1)

    A code that classifies a procedure for searching, sorting and display purposes.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Procedure.category.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control0..*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Procedure.category.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ system
    • 18. Procedure.category.coding:SNOMED-CT
      Slice NameSNOMED-CT
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control0..1*
      BindingThe codes SHOULD be taken from For codes, see ProzedurenKategorieSCT
      (preferred to https://gematik.de/fhir/isik/ValueSet/ProzedurenKategorieSCT)
      TypeCoding(https://gematik.de/fhir/isik/StructureDefinition/ISiKSnomedCTCoding)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Procedure.code
      Definition

      The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

      ShortProzeduren-CodeIdentification of the procedure
      Comments

      Prozeduren SOLLEN mindestens entweder mit einem OPS-Code oder einem SNOMED-Code aus dem angegebenen ValueSet codiert werden. Ist keine Codierung möglich, MUSS statt dessen eine textuelle Beschreibung der Prozedur angegeben werden.
      Begründung Pflichtfeld: Ist weder eine Codierung noch eine textuelle Beschreibung vorhanden, besitzt diese Ressource keine medizinische Aussagefähigkeit.

      Control10..1
      BindingFor example codes, see ProcedureCodes(SNOMEDCT)http://hl7.org/fhir/ValueSet/procedure-code|4.0.1
      (example to http://hl7.org/fhir/ValueSet/procedure-code|4.0.1)

      A code to identify a specific procedure .

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      0..1 to account for primarily narrative only resources.

      Alternate Namestype
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      sct-ops-1: Falls die Prozedur kodiert vorliegt, SOLL mindestens ein OPS oder SNOMED-CT Code angegeben werden. (coding.exists() implies coding.where(system = 'http://snomed.info/sct').exists() or coding.where(system = 'http://fhir.de/CodeSystem/bfarm/ops').exists())
      proc-ISiK-3: Entweder MUSS eine kodierte Prozedur vorliegen oder eine textuelle Beschreibung. Stattdessen nur Extensions hinzuzufügen (vgl. https://www.hl7.org/fhir/element.html - ele-1), ist explizit nicht erlaubt. (coding.exists().not() implies text.exists())
      22. Procedure.code.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCodierte Darstellung der ProzedurCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control0..*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Procedure.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ system
      • 24. Procedure.code.coding:OPS
        Slice NameOPS
        Definition

        A reference to a code defined by a terminology system.

        ShortOPS-codierte Darstellung der ProzedurCode defined by a terminology system
        Comments

        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..1*
        TypeCoding(Coding-Profil für OPS)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Procedure.code.coding:OPS.extension:Seitenlokalisation
        Slice NameSeitenlokalisation
        Definition

        Optional Extension Element - found in all resources.

        ShortSeitenlokalisation
        Comments

        Begründung MS: Bei OPS-codierten Prozeduren an paarigen Organen oder Körperteilen müssen die Zusatzkennzeichen für die Seitigkeit (R, L oder B) angeben werden

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(ExtensionSeitenlokalisation) (Extension Type: Coding)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Procedure.code.coding:OPS.system
        Definition

        The identification of the code system that defines the meaning of the symbol in the code.

        ShortNamensraum des Prozeduren-CodesIdentity of the terminology system
        Comments

        Hier ist stets der Wert http://fhir.de/CodeSystem/bfarm/ops anzugeben.


        The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Need to be unambiguous about the source of the definition of the symbol.

        Fixed Valuehttp://fhir.de/CodeSystem/bfarm/ops
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Procedure.code.coding:OPS.version
        Definition

        Bie Verwendung von OPS ist die Angabe der Version zwingend erforderlich. Hierdurch wird der Tatsache Rechnung getragen, dass jede der jährlich neu erscheinenden Fassung von OPS ein neues Codesystem darstellt.


        The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

        ShortDie Jahresversion des OPS Kataloges. Angegeben wird immer die vierstellige Jahreszahl (z.B. `2017`)Version of the system - if relevant
        Comments

        Begründung Pflichtfeld: Bei Verwendung von OPS ist die Angabe der Version zwingend erforderlich. Hierdurch wird der Tatsache Rechnung getragen, dass jede der jährlich neu erscheinenden Fassung von OPS ein neues Codesystem darstellt.


        Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

        NoteThis is a business version Id, not a resource version Id (see discussion)
        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Procedure.code.coding:OPS.code
        Definition

        A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

        ShortOPS-CodeSymbol in syntax defined by the system
        Comments

        Hier ist der OPS-Code ohne jegliche Zusatzkennzeichen (z.B. Seitenlokalisation) oder Versionsnummern anzugeben.

        Control10..1
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Need to refer to a particular code in the system.

        ExampleEinfacher OPS-Code: 5-470
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ops-regex: In code sind nur gültige OPS-Codes ohne Zusätze erlaubt (matches('^[1|3|5|6|8|9]-[a-zA-Z0-9]{3}([.][a-zA-Z0-9]{1,2})?$'))
        34. Procedure.code.coding:SNOMED-CT
        Slice NameSNOMED-CT
        Definition

        A reference to a code defined by a terminology system.

        ShortSNOMED-codierte Darstellung der ProzedurCode defined by a terminology system
        Comments

        Hintergrund und Begründung zum Must-Support: Das BfArM hat ein 'Zielbild für eine semantische Strategie' (https://www.bfarm.de/DE/Kodiersysteme/Services/Terminologieserver/Semantik-Strategie/_node.html) verfasst, in dem die Nutzung von international gängigen Basis-Terminologien vorgestellt wird. Dort wird als grundlegende Position dargestellt, dass basierend auf einer Basisterminologie weitere Use Cases bedient werden sollen. Bei Prozeduren wäre das damit eine klinische Dokumentation mit SNOMED CT als internationalem Kodiersystem und einer Ableitung davon zum OPS. Dies ist insbesondere auch wichtig für den Datentransfer in den European Health Data Space, in dem der OPS keine Rolle spielen wird.


        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control0..1*
        BindingThe codes SHALL be taken from For codes, see ProzedurenCodesSCT
        (required to https://gematik.de/fhir/isik/ValueSet/ProzedurenCodesSCT)
        TypeCoding(https://gematik.de/fhir/isik/StructureDefinition/ISiKSnomedCTCoding)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Procedure.code.text
        Definition

        A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

        ShortFreitextiche Beschreibung der ProzedurPlain text representation of the concept
        Comments

        Die freitextliche Beschreibung kann ergänzend oder anstelle einer codierten Angabe der Prozedur erfolgen.


        Very often the text is the same as a displayName of one of the codings.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Procedure.subject
        Definition

        The person, animal or group on which the procedure was performed.

        ShortPatientenbezugWho the procedure was performed on
        Comments

        Begründung Must-Support: Ein Patientenbezug der Prozedur MUSS stets zum Zwecke der Nachvollziehbarkeit und Datenintegrität vorliegen.

        Control1..1
        TypeReference(Patient, Group)
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Alternate Namespatient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Procedure.subject.reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        ShortPatienten-LinkLiteral reference, Relative, internal or absolute URL
        Comments

        Begründung MS: Die Verlinkung auf eine Patienten-Ressource dient der technischen Zuordnung der Dokumentation zu einem Patienten und ermöglicht wichtige API-Funktionen wie verkettete Suche, (Reverse-)Include etc. Im ISik Kontext MUSS die referenzierte Ressource konform zu ISiKPatient sein. Jenseits von ISiK KÖNNEN weitere Instanzen mit anderen Profilen referenziert werden.


        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control10..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Procedure.encounter
        Definition

        The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

        ShortAufenthaltsbezugEncounter created as part of
        Comments

        Begründung Must-Support: Ein Aufenthaltsbezug der Prozedur MUSS stets zum Zwecke der Nachvollziehbarkeit und Datenintegrität vorliegen.


        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

        Control0..1
        TypeReference(Encounter)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Procedure.encounter.reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        ShortEncounter-LinkLiteral reference, Relative, internal or absolute URL
        Comments

        Begründung Pflichtfeld: Die Verlinkung auf eine Encounter-Ressource dient der technischen Zuordnung der Dokumentation zu einem Aufenthalt und ermöglicht wichtige API-Funktionen wie verkettete Suche, (Reverse-)Include etc. Im ISik Kontext MUSS die referenzierte Ressource konform zu ISiKKontaktGesundheitseinrichtung sein. Jenseits von ISiK KÖNNEN weitere Instanzen mit anderen Profilen referenziert werden.


        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control10..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Procedure.performed[x]
        Definition

        Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

        ShortDurchführungsdatum oder -ZeitraumWhen the procedure was performed
        Comments

        Es muss mindestens entweder ein (partielles) Durchführungsdatum oder der Beginn des Durchführungszeitraumes angegeben werden. Begründung Pflichtfeld: Die zeitliche Einordnung einer Prozedur ist in vielen Fällen maßgeblich für deren medizinische Relevanz.


        Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

        Control10..1
        TypeChoice of: dateTime, Period, string, Range, Age
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Procedure.note
        Definition

        Any other notes and comments about the procedure.

        ShortNotizenAdditional information about the procedure
        Comments

        Ergänzende Hinweise und Anmerkungen zur Prozedur

        Control0..*
        TypeAnnotation
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be foundhere

        0. Procedure
        Invariantsproc-ISiK-1: Falls die Prozedur per OPS kodiert wird, MUSS eine SNOMED-CT kodierte Category abgebildet werden (code.coding.where(system = 'http://fhir.de/CodeSystem/bfarm/ops').exists() implies category.coding.where(system = 'http://snomed.info/sct').exists())
        proc-ISiK-2: Falls eine codierte Prozedur vorliegt MUSS eine kodierte Category abgebildet werden (code.coding.exists() implies category.coding.exists())
        2. Procedure.id
        Shortserverseitige, interne ID des Datensatzes
        Comments

        bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine id verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine idverfügen.

        Must Supporttrue
        4. Procedure.meta
        6. Procedure.meta.versionId
        ShortEindeutiger Name der serverseitigen Version des Datensatzes
        Comments

        Alle von einem Server bereitgestellten Ressourcen SOLLEN über eine versionID verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine versionIDverfügen.

        8. Procedure.meta.lastUpdated
        ShortZeitpunkt der letzten Änderung
        Comments

        Alle von einem Server bereitgestellten Ressourcen SOLLEN über ein lastUpdate verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über ein lastUpdateverfügen.

        10. Procedure.extension
        Must Supporttrue
        SlicingThis element introduces a set of slices on Procedure.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 12. Procedure.extension:Dokumentationsdatum
          Slice NameDokumentationsdatum
          ShortDokumentationsdatum
          Comments

          Datum, an dem die Prozedur dokumentiert wurde.
          Es handelt sich hierbei um das fachliche Dokumentationsdatum, nicht zu verwechseln mit dem Datum der technischen Anlage des Datensatzes im Primärsystem. Diese beiden Daten können jedoch identisch sein.

          Control0..1
          TypeExtension(ExtensionProzedurDokumentationsdatum) (Extension Type: dateTime)
          Must Supporttrue
          14. Procedure.status
          ShortStatus
          Comments

          Zeigt den aktuellen Status der Prozedur an.
          **WICHTIGER Hinweis für Implementierer:

          • Alle server-seitigen Implementierungen MÜSSEN in der Lage sein, die systemintern möglichen Statuswerte korrekt in FHIR abzubilden, mindestens jedoch die Werte completed und unknown.
          • Alle client-seitigen Implementierungen MÜSSEN in der Lage sein, sämtliche Status-Codes zu interpretieren und dem Anwender in angemessener Form darstellen zu können, beispielsweise durch Ausblenden/Durchstreichen von Prozeduren mit dem status entered-in-error und Ausgrauen von Prozeduren, die noch nicht stattgefunden haben, o.ä.
          Must Supporttrue
          16. Procedure.category
          ShortKategorie
          Comments

          Die Kategorisierung erfolgt vorzugsweise auf Basis von SNOMED CT. Für OPS-codierte Prozeduren MUSS die Kategorie angegeben werden: Sie kann ermittelt werden, indem das erste Zeichen des OPS-Codes mit Hilfe einer ConceptMap auf die zutreffende SNOMED-Kategorie gemappt wird.

          Begründung MS: Die Kategorisierung dient der Verbesserung von Suche und Darstellung.

          Must Supporttrue
          18. Procedure.category.coding
          SlicingThis element introduces a set of slices on Procedure.category.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • pattern @ system
          • 20. Procedure.category.coding:SNOMED-CT
            Slice NameSNOMED-CT
            Control0..1
            BindingThe codes SHOULD be taken from ProzedurenKategorieSCT
            (preferred to https://gematik.de/fhir/isik/ValueSet/ProzedurenKategorieSCT)
            TypeCoding(https://gematik.de/fhir/isik/StructureDefinition/ISiKSnomedCTCoding)
            Must Supporttrue
            22. Procedure.code
            ShortProzeduren-Code
            Comments

            Prozeduren SOLLEN mindestens entweder mit einem OPS-Code oder einem SNOMED-Code aus dem angegebenen ValueSet codiert werden. Ist keine Codierung möglich, MUSS statt dessen eine textuelle Beschreibung der Prozedur angegeben werden.
            Begründung Pflichtfeld: Ist weder eine Codierung noch eine textuelle Beschreibung vorhanden, besitzt diese Ressource keine medizinische Aussagefähigkeit.

            Control1..?
            Must Supporttrue
            Invariantssct-ops-1: Falls die Prozedur kodiert vorliegt, SOLL mindestens ein OPS oder SNOMED-CT Code angegeben werden. (coding.exists() implies coding.where(system = 'http://snomed.info/sct').exists() or coding.where(system = 'http://fhir.de/CodeSystem/bfarm/ops').exists())
            proc-ISiK-3: Entweder MUSS eine kodierte Prozedur vorliegen oder eine textuelle Beschreibung. Stattdessen nur Extensions hinzuzufügen (vgl. https://www.hl7.org/fhir/element.html - ele-1), ist explizit nicht erlaubt. (coding.exists().not() implies text.exists())
            24. Procedure.code.coding
            ShortCodierte Darstellung der Prozedur
            Must Supporttrue
            SlicingThis element introduces a set of slices on Procedure.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • pattern @ system
            • 26. Procedure.code.coding:OPS
              Slice NameOPS
              ShortOPS-codierte Darstellung der Prozedur
              Control0..1
              TypeCoding(Coding-Profil für OPS)
              Must Supporttrue
              28. Procedure.code.coding:OPS.extension:Seitenlokalisation
              Slice NameSeitenlokalisation
              ShortSeitenlokalisation
              Comments

              Begründung MS: Bei OPS-codierten Prozeduren an paarigen Organen oder Körperteilen müssen die Zusatzkennzeichen für die Seitigkeit (R, L oder B) angeben werden

              Must Supporttrue
              30. Procedure.code.coding:OPS.system
              ShortNamensraum des Prozeduren-Codes
              Comments

              Hier ist stets der Wert http://fhir.de/CodeSystem/bfarm/ops anzugeben.

              Must Supporttrue
              32. Procedure.code.coding:OPS.version
              ShortDie Jahresversion des OPS Kataloges. Angegeben wird immer die vierstellige Jahreszahl (z.B. `2017`)
              Comments

              Begründung Pflichtfeld: Bei Verwendung von OPS ist die Angabe der Version zwingend erforderlich. Hierdurch wird der Tatsache Rechnung getragen, dass jede der jährlich neu erscheinenden Fassung von OPS ein neues Codesystem darstellt.

              NoteThis is a business version Id, not a resource version Id (see discussion)
              Must Supporttrue
              34. Procedure.code.coding:OPS.code
              ShortOPS-Code
              Comments

              Hier ist der OPS-Code ohne jegliche Zusatzkennzeichen (z.B. Seitenlokalisation) oder Versionsnummern anzugeben.

              Must Supporttrue
              36. Procedure.code.coding:SNOMED-CT
              Slice NameSNOMED-CT
              ShortSNOMED-codierte Darstellung der Prozedur
              Comments

              Hintergrund und Begründung zum Must-Support: Das BfArM hat ein 'Zielbild für eine semantische Strategie' (https://www.bfarm.de/DE/Kodiersysteme/Services/Terminologieserver/Semantik-Strategie/_node.html) verfasst, in dem die Nutzung von international gängigen Basis-Terminologien vorgestellt wird. Dort wird als grundlegende Position dargestellt, dass basierend auf einer Basisterminologie weitere Use Cases bedient werden sollen. Bei Prozeduren wäre das damit eine klinische Dokumentation mit SNOMED CT als internationalem Kodiersystem und einer Ableitung davon zum OPS. Dies ist insbesondere auch wichtig für den Datentransfer in den European Health Data Space, in dem der OPS keine Rolle spielen wird.

              Control0..1
              BindingThe codes SHALL be taken from ProzedurenCodesSCT
              (required to https://gematik.de/fhir/isik/ValueSet/ProzedurenCodesSCT)
              TypeCoding(https://gematik.de/fhir/isik/StructureDefinition/ISiKSnomedCTCoding)
              Must Supporttrue
              38. Procedure.code.text
              ShortFreitextiche Beschreibung der Prozedur
              Comments

              Die freitextliche Beschreibung kann ergänzend oder anstelle einer codierten Angabe der Prozedur erfolgen.

              Must Supporttrue
              40. Procedure.subject
              ShortPatientenbezug
              Comments

              Begründung Must-Support: Ein Patientenbezug der Prozedur MUSS stets zum Zwecke der Nachvollziehbarkeit und Datenintegrität vorliegen.

              Must Supporttrue
              42. Procedure.subject.reference
              ShortPatienten-Link
              Comments

              Begründung MS: Die Verlinkung auf eine Patienten-Ressource dient der technischen Zuordnung der Dokumentation zu einem Patienten und ermöglicht wichtige API-Funktionen wie verkettete Suche, (Reverse-)Include etc. Im ISik Kontext MUSS die referenzierte Ressource konform zu ISiKPatient sein. Jenseits von ISiK KÖNNEN weitere Instanzen mit anderen Profilen referenziert werden.

              Control1..?
              Must Supporttrue
              44. Procedure.encounter
              ShortAufenthaltsbezug
              Comments

              Begründung Must-Support: Ein Aufenthaltsbezug der Prozedur MUSS stets zum Zwecke der Nachvollziehbarkeit und Datenintegrität vorliegen.

              Must Supporttrue
              46. Procedure.encounter.reference
              ShortEncounter-Link
              Comments

              Begründung Pflichtfeld: Die Verlinkung auf eine Encounter-Ressource dient der technischen Zuordnung der Dokumentation zu einem Aufenthalt und ermöglicht wichtige API-Funktionen wie verkettete Suche, (Reverse-)Include etc. Im ISik Kontext MUSS die referenzierte Ressource konform zu ISiKKontaktGesundheitseinrichtung sein. Jenseits von ISiK KÖNNEN weitere Instanzen mit anderen Profilen referenziert werden.

              Control1..?
              Must Supporttrue
              48. Procedure.performed[x]
              ShortDurchführungsdatum oder -Zeitraum
              Comments

              Es muss mindestens entweder ein (partielles) Durchführungsdatum oder der Beginn des Durchführungszeitraumes angegeben werden. Begründung Pflichtfeld: Die zeitliche Einordnung einer Prozedur ist in vielen Fällen maßgeblich für deren medizinische Relevanz.

              Control1..?
              TypeChoice of: dateTime, Period, string, Range, Age
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              50. Procedure.note
              ShortNotizen
              Comments

              Ergänzende Hinweise und Anmerkungen zur Prozedur

              Must Supporttrue

              Guidance on how to interpret the contents of this table can be foundhere

              0. Procedure
              Definition

              An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

              ShortAn action that is being or was performed on a patient
              Control0..*
              Is Modifierfalse
              Summaryfalse
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              proc-ISiK-1: Falls die Prozedur per OPS kodiert wird, MUSS eine SNOMED-CT kodierte Category abgebildet werden (code.coding.where(system = 'http://fhir.de/CodeSystem/bfarm/ops').exists() implies category.coding.where(system = 'http://snomed.info/sct').exists())
              proc-ISiK-2: Falls eine codierte Prozedur vorliegt MUSS eine kodierte Category abgebildet werden (code.coding.exists() implies category.coding.exists())
              2. Procedure.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              Shortserverseitige, interne ID des Datensatzes
              Comments

              bedingtes Pflichtfeld/bedingtes MS: Alle von einem Server bereitgestellten Ressourcen MÜSSEN über eine id verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine idverfügen.

              Control0..1
              Typeid
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              4. Procedure.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Procedure.meta.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              8. Procedure.meta.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Procedure.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 10. Procedure.meta.versionId
                Definition

                The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

                ShortEindeutiger Name der serverseitigen Version des Datensatzes
                Comments

                Alle von einem Server bereitgestellten Ressourcen SOLLEN über eine versionID verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über eine versionIDverfügen.

                Control0..1
                Typeid
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                12. Procedure.meta.lastUpdated
                Definition

                When the resource last changed - e.g. when the version changed.

                ShortZeitpunkt der letzten Änderung
                Comments

                Alle von einem Server bereitgestellten Ressourcen SOLLEN über ein lastUpdate verfügen. Von Clients erzeugte Ressourcen, die im Kontext einer CREATE-Interaktion übermittelt werden, MÜSSEN NICHT über ein lastUpdateverfügen.

                Control0..1
                Typeinstant
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                14. Procedure.meta.source
                Definition

                A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

                ShortIdentifies where the resource comes from
                Comments

                In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

                This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

                Control0..1
                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                16. Procedure.meta.profile
                Definition

                A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

                ShortProfiles this resource claims to conform to
                Comments

                It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

                Control0..*
                Typecanonical(StructureDefinition)
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                18. Procedure.meta.security
                Definition

                Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

                ShortSecurity Labels applied to this resource
                Comments

                The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                (extensible to http://hl7.org/fhir/ValueSet/security-labels|4.0.1)

                Security Labels from the Healthcare Privacy and Security Classification System.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                20. Procedure.meta.tag
                Definition

                Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

                ShortTags applied to this resource
                Comments

                The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

                Control0..*
                BindingFor example codes, see CommonTags
                (example to http://hl7.org/fhir/ValueSet/common-tags|4.0.1)

                Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                22. Procedure.implicitRules
                Definition

                A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                ShortA set of rules under which this content was created
                Comments

                Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                Control0..1
                Typeuri
                Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. Procedure.language
                Definition

                The base language in which the resource is written.

                ShortLanguage of the resource content
                Comments

                Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                Control0..1
                BindingThe codes SHOULD be taken from CommonLanguages
                (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

                A human language.

                Additional BindingsPurpose
                AllLanguagesMax Binding
                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. Procedure.text
                Definition

                A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                ShortText summary of the resource, for human interpretation
                Comments

                Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                Control0..1
                TypeNarrative
                Is Modifierfalse
                Summaryfalse
                Alternate Namesnarrative, html, xhtml, display
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Procedure.contained
                Definition

                These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                ShortContained, inline Resources
                Comments

                This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                Control0..*
                TypeResource
                Is Modifierfalse
                Summaryfalse
                Alternate Namesinline resources, anonymous resources, contained resources
                30. Procedure.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Procedure.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 32. Procedure.extension:Dokumentationsdatum
                  Slice NameDokumentationsdatum
                  Definition

                  Dokumentationsdatum der Prozedur, falls abweichend vom Durchführungsdatum

                  ShortDokumentationsdatum
                  Comments

                  Datum, an dem die Prozedur dokumentiert wurde.
                  Es handelt sich hierbei um das fachliche Dokumentationsdatum, nicht zu verwechseln mit dem Datum der technischen Anlage des Datensatzes im Primärsystem. Diese beiden Daten können jedoch identisch sein.

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(ExtensionProzedurDokumentationsdatum) (Extension Type: dateTime)
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  34. Procedure.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                  Summaryfalse
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  36. Procedure.identifier
                  Definition

                  Business identifiers assigned to this procedure by the performer or other systems which remain constant as the resource is updated and is propagated from server to server.

                  ShortExternal Identifiers for this procedure
                  Comments

                  This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and Person resource instances might share the same social insurance number.

                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows identification of the procedure as it is known by various participating systems and in a way that remains consistent across servers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  38. Procedure.instantiatesCanonical
                  Definition

                  The URL pointing to a FHIR-defined protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

                  ShortInstantiates FHIR protocol or definition
                  Control0..*
                  Typecanonical(PlanDefinition, ActivityDefinition, Measure, OperationDefinition, Questionnaire)
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  40. Procedure.instantiatesUri
                  Definition

                  The URL pointing to an externally maintained protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

                  ShortInstantiates external protocol or definition
                  Comments

                  This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

                  Control0..*
                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  42. Procedure.basedOn
                  Definition

                  A reference to a resource that contains details of the request for this procedure.

                  ShortA request for this procedure
                  Control0..*
                  TypeReference(CarePlan, ServiceRequest)
                  Is Modifierfalse
                  Summarytrue
                  Alternate Namesfulfills
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  44. Procedure.partOf
                  Definition

                  A larger event of which this particular procedure is a component or step.

                  ShortPart of referenced event
                  Comments

                  The MedicationAdministration resource has a partOf reference to Procedure, but this is not a circular reference. For example, the anesthesia MedicationAdministration is part of the surgical Procedure (MedicationAdministration.partOf = Procedure). For example, the procedure to insert the IV port for an IV medication administration is part of the medication administration (Procedure.partOf = MedicationAdministration).

                  Control0..*
                  TypeReference(Procedure, Observation, MedicationAdministration)
                  Is Modifierfalse
                  Summarytrue
                  Alternate Namescontainer
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  46. Procedure.status
                  Definition

                  A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

                  ShortStatus
                  Comments

                  Zeigt den aktuellen Status der Prozedur an.
                  **WICHTIGER Hinweis für Implementierer:

                  • Alle server-seitigen Implementierungen MÜSSEN in der Lage sein, die systemintern möglichen Statuswerte korrekt in FHIR abzubilden, mindestens jedoch die Werte completed und unknown.
                  • Alle client-seitigen Implementierungen MÜSSEN in der Lage sein, sämtliche Status-Codes zu interpretieren und dem Anwender in angemessener Form darstellen zu können, beispielsweise durch Ausblenden/Durchstreichen von Prozeduren mit dem status entered-in-error und Ausgrauen von Prozeduren, die noch nicht stattgefunden haben, o.ä.
                  Control1..1
                  BindingThe codes SHALL be taken from EventStatus
                  (required to http://hl7.org/fhir/ValueSet/event-status|4.0.1)

                  A code specifying the state of the procedure.

                  Typecode
                  Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  48. Procedure.statusReason
                  Definition

                  Captures the reason for the current state of the procedure.

                  ShortReason for current status
                  Comments

                  This is generally only used for "exception" statuses such as "not-done", "suspended" or "aborted". The reason for performing the event at all is captured in reasonCode, not here.

                  Control0..1
                  BindingFor example codes, see ProcedureNotPerformedReason(SNOMED-CT)
                  (example to http://hl7.org/fhir/ValueSet/procedure-not-performed-reason|4.0.1)

                  A code that identifies the reason a procedure was not performed.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summarytrue
                  Alternate NamesSuspended Reason, Cancelled Reason
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  50. Procedure.category
                  Definition

                  A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

                  ShortKategorie
                  Comments

                  Die Kategorisierung erfolgt vorzugsweise auf Basis von SNOMED CT. Für OPS-codierte Prozeduren MUSS die Kategorie angegeben werden: Sie kann ermittelt werden, indem das erste Zeichen des OPS-Codes mit Hilfe einer ConceptMap auf die zutreffende SNOMED-Kategorie gemappt wird.

                  Begründung MS: Die Kategorisierung dient der Verbesserung von Suche und Darstellung.

                  Control0..1
                  BindingFor example codes, see ProcedureCategoryCodes(SNOMEDCT)
                  (example to http://hl7.org/fhir/ValueSet/procedure-category|4.0.1)

                  A code that classifies a procedure for searching, sorting and display purposes.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  52. Procedure.category.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  54. Procedure.category.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Procedure.category.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 56. Procedure.category.coding
                    Definition

                    A reference to a code defined by a terminology system.

                    ShortCode defined by a terminology system
                    Comments

                    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                    Control0..*
                    TypeCoding
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Allows for alternative encodings within a code system, and translations to other code systems.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Procedure.category.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • pattern @ system
                    • 58. Procedure.category.coding:SNOMED-CT
                      Slice NameSNOMED-CT
                      Definition

                      A reference to a code defined by a terminology system.

                      ShortCode defined by a terminology system
                      Comments

                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                      Control0..1
                      BindingThe codes SHOULD be taken from ProzedurenKategorieSCT
                      (preferred to https://gematik.de/fhir/isik/ValueSet/ProzedurenKategorieSCT)
                      TypeCoding(https://gematik.de/fhir/isik/StructureDefinition/ISiKSnomedCTCoding)
                      Is Modifierfalse
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Allows for alternative encodings within a code system, and translations to other code systems.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      60. Procedure.category.text
                      Definition

                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                      ShortPlain text representation of the concept
                      Comments

                      Very often the text is the same as a displayName of one of the codings.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Procedure.code
                      Definition

                      The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

                      ShortProzeduren-Code
                      Comments

                      Prozeduren SOLLEN mindestens entweder mit einem OPS-Code oder einem SNOMED-Code aus dem angegebenen ValueSet codiert werden. Ist keine Codierung möglich, MUSS statt dessen eine textuelle Beschreibung der Prozedur angegeben werden.
                      Begründung Pflichtfeld: Ist weder eine Codierung noch eine textuelle Beschreibung vorhanden, besitzt diese Ressource keine medizinische Aussagefähigkeit.

                      Control1..1
                      BindingFor example codes, see ProcedureCodes(SNOMEDCT)
                      (example to http://hl7.org/fhir/ValueSet/procedure-code|4.0.1)

                      A code to identify a specific procedure .

                      TypeCodeableConcept
                      Is Modifierfalse
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      0..1 to account for primarily narrative only resources.

                      Alternate Namestype
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      sct-ops-1: Falls die Prozedur kodiert vorliegt, SOLL mindestens ein OPS oder SNOMED-CT Code angegeben werden. (coding.exists() implies coding.where(system = 'http://snomed.info/sct').exists() or coding.where(system = 'http://fhir.de/CodeSystem/bfarm/ops').exists())
                      proc-ISiK-3: Entweder MUSS eine kodierte Prozedur vorliegen oder eine textuelle Beschreibung. Stattdessen nur Extensions hinzuzufügen (vgl. https://www.hl7.org/fhir/element.html - ele-1), ist explizit nicht erlaubt. (coding.exists().not() implies text.exists())
                      64. Procedure.code.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      66. Procedure.code.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Procedure.code.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 68. Procedure.code.coding
                        Definition

                        A reference to a code defined by a terminology system.

                        ShortCodierte Darstellung der Prozedur
                        Comments

                        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                        Control0..*
                        TypeCoding
                        Is Modifierfalse
                        Must Supporttrue
                        Summarytrue
                        Requirements

                        Allows for alternative encodings within a code system, and translations to other code systems.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Procedure.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • pattern @ system
                        • 70. Procedure.code.coding:OPS
                          Slice NameOPS
                          Definition

                          A reference to a code defined by a terminology system.

                          ShortOPS-codierte Darstellung der Prozedur
                          Comments

                          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                          Control0..1
                          TypeCoding(Coding-Profil für OPS)
                          Is Modifierfalse
                          Must Supporttrue
                          Summarytrue
                          Requirements

                          Allows for alternative encodings within a code system, and translations to other code systems.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          72. Procedure.code.coding:OPS.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          74. Procedure.code.coding:OPS.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Procedure.code.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 76. Procedure.code.coding:OPS.extension:Seitenlokalisation
                            Slice NameSeitenlokalisation
                            Definition

                            Optional Extension Element - found in all resources.

                            ShortSeitenlokalisation
                            Comments

                            Begründung MS: Bei OPS-codierten Prozeduren an paarigen Organen oder Körperteilen müssen die Zusatzkennzeichen für die Seitigkeit (R, L oder B) angeben werden

                            Control0..1
                            This element is affected by the following invariants: ele-1
                            TypeExtension(ExtensionSeitenlokalisation) (Extension Type: Coding)
                            Is Modifierfalse
                            Must Supporttrue
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            78. Procedure.code.coding:OPS.system
                            Definition

                            The identification of the code system that defines the meaning of the symbol in the code.

                            ShortNamensraum des Prozeduren-Codes
                            Comments

                            Hier ist stets der Wert http://fhir.de/CodeSystem/bfarm/ops anzugeben.

                            Control1..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            Need to be unambiguous about the source of the definition of the symbol.

                            Fixed Valuehttp://fhir.de/CodeSystem/bfarm/ops
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            80. Procedure.code.coding:OPS.version
                            Definition

                            Bie Verwendung von OPS ist die Angabe der Version zwingend erforderlich. Hierdurch wird der Tatsache Rechnung getragen, dass jede der jährlich neu erscheinenden Fassung von OPS ein neues Codesystem darstellt.

                            ShortDie Jahresversion des OPS Kataloges. Angegeben wird immer die vierstellige Jahreszahl (z.B. `2017`)
                            Comments

                            Begründung Pflichtfeld: Bei Verwendung von OPS ist die Angabe der Version zwingend erforderlich. Hierdurch wird der Tatsache Rechnung getragen, dass jede der jährlich neu erscheinenden Fassung von OPS ein neues Codesystem darstellt.

                            NoteThis is a business version Id, not a resource version Id (see discussion)
                            Control1..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            82. Procedure.code.coding:OPS.code
                            Definition

                            A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                            ShortOPS-Code
                            Comments

                            Hier ist der OPS-Code ohne jegliche Zusatzkennzeichen (z.B. Seitenlokalisation) oder Versionsnummern anzugeben.

                            Control1..1
                            Typecode
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            Need to refer to a particular code in the system.

                            ExampleEinfacher OPS-Code: 5-470
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ops-regex: In code sind nur gültige OPS-Codes ohne Zusätze erlaubt (matches('^[1|3|5|6|8|9]-[a-zA-Z0-9]{3}([.][a-zA-Z0-9]{1,2})?$'))
                            84. Procedure.code.coding:OPS.display
                            Definition

                            A representation of the meaning of the code in the system, following the rules of the system.

                            ShortRepresentation defined by the system
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            86. Procedure.code.coding:OPS.userSelected
                            Definition

                            Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                            ShortIf this coding was chosen directly by the user
                            Comments

                            Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                            Control0..1
                            Typeboolean
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            88. Procedure.code.coding:SNOMED-CT
                            Slice NameSNOMED-CT
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortSNOMED-codierte Darstellung der Prozedur
                            Comments

                            Hintergrund und Begründung zum Must-Support: Das BfArM hat ein 'Zielbild für eine semantische Strategie' (https://www.bfarm.de/DE/Kodiersysteme/Services/Terminologieserver/Semantik-Strategie/_node.html) verfasst, in dem die Nutzung von international gängigen Basis-Terminologien vorgestellt wird. Dort wird als grundlegende Position dargestellt, dass basierend auf einer Basisterminologie weitere Use Cases bedient werden sollen. Bei Prozeduren wäre das damit eine klinische Dokumentation mit SNOMED CT als internationalem Kodiersystem und einer Ableitung davon zum OPS. Dies ist insbesondere auch wichtig für den Datentransfer in den European Health Data Space, in dem der OPS keine Rolle spielen wird.

                            Control0..1
                            BindingThe codes SHALL be taken from ProzedurenCodesSCT
                            (required to https://gematik.de/fhir/isik/ValueSet/ProzedurenCodesSCT)
                            TypeCoding(https://gematik.de/fhir/isik/StructureDefinition/ISiKSnomedCTCoding)
                            Is Modifierfalse
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            90. Procedure.code.text
                            Definition

                            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                            ShortFreitextiche Beschreibung der Prozedur
                            Comments

                            Die freitextliche Beschreibung kann ergänzend oder anstelle einer codierten Angabe der Prozedur erfolgen.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Requirements

                            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            92. Procedure.subject
                            Definition

                            The person, animal or group on which the procedure was performed.

                            ShortPatientenbezug
                            Comments

                            Begründung Must-Support: Ein Patientenbezug der Prozedur MUSS stets zum Zwecke der Nachvollziehbarkeit und Datenintegrität vorliegen.

                            Control1..1
                            TypeReference(Patient, Group)
                            Is Modifierfalse
                            Must Supporttrue
                            Must Support TypesNo must-support rules about the choice of types/profiles
                            Summarytrue
                            Alternate Namespatient
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            94. Procedure.subject.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            96. Procedure.subject.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Procedure.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 98. Procedure.subject.reference
                              Definition

                              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                              ShortPatienten-Link
                              Comments

                              Begründung MS: Die Verlinkung auf eine Patienten-Ressource dient der technischen Zuordnung der Dokumentation zu einem Patienten und ermöglicht wichtige API-Funktionen wie verkettete Suche, (Reverse-)Include etc. Im ISik Kontext MUSS die referenzierte Ressource konform zu ISiKPatient sein. Jenseits von ISiK KÖNNEN weitere Instanzen mit anderen Profilen referenziert werden.

                              Control1..1
                              This element is affected by the following invariants: ref-1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Must Supporttrue
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              100. Procedure.subject.type
                              Definition

                              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                              ShortType the reference refers to (e.g. "Patient")
                              Comments

                              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from ResourceType
                              (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                              Aa resource (or, for logical models, the URI of the logical model).

                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              102. Procedure.subject.identifier
                              Definition

                              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                              ShortLogical reference, when literal reference is not known
                              Comments

                              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..1
                              TypeIdentifier
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              104. Procedure.subject.display
                              Definition

                              Plain text narrative that identifies the resource in addition to the resource reference.

                              ShortText alternative for the resource
                              Comments

                              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              106. Procedure.encounter
                              Definition

                              The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

                              ShortAufenthaltsbezug
                              Comments

                              Begründung Must-Support: Ein Aufenthaltsbezug der Prozedur MUSS stets zum Zwecke der Nachvollziehbarkeit und Datenintegrität vorliegen.

                              Control0..1
                              TypeReference(Encounter)
                              Is Modifierfalse
                              Must Supporttrue
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              108. Procedure.encounter.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              110. Procedure.encounter.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Procedure.encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 112. Procedure.encounter.reference
                                Definition

                                A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                ShortEncounter-Link
                                Comments

                                Begründung Pflichtfeld: Die Verlinkung auf eine Encounter-Ressource dient der technischen Zuordnung der Dokumentation zu einem Aufenthalt und ermöglicht wichtige API-Funktionen wie verkettete Suche, (Reverse-)Include etc. Im ISik Kontext MUSS die referenzierte Ressource konform zu ISiKKontaktGesundheitseinrichtung sein. Jenseits von ISiK KÖNNEN weitere Instanzen mit anderen Profilen referenziert werden.

                                Control1..1
                                This element is affected by the following invariants: ref-1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                114. Procedure.encounter.type
                                Definition

                                The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                ShortType the reference refers to (e.g. "Patient")
                                Comments

                                This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                                Aa resource (or, for logical models, the URI of the logical model).

                                Typeuri
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                116. Procedure.encounter.identifier
                                Definition

                                An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                ShortLogical reference, when literal reference is not known
                                Comments

                                When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                NoteThis is a business identifier, not a resource identifier (see discussion)
                                Control0..1
                                TypeIdentifier
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                118. Procedure.encounter.display
                                Definition

                                Plain text narrative that identifies the resource in addition to the resource reference.

                                ShortText alternative for the resource
                                Comments

                                This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                120. Procedure.performed[x]
                                Definition

                                Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

                                ShortDurchführungsdatum oder -Zeitraum
                                Comments

                                Es muss mindestens entweder ein (partielles) Durchführungsdatum oder der Beginn des Durchführungszeitraumes angegeben werden. Begründung Pflichtfeld: Die zeitliche Einordnung einer Prozedur ist in vielen Fällen maßgeblich für deren medizinische Relevanz.

                                Control1..1
                                TypeChoice of: dateTime, Period
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Must Support TypesNo must-support rules about the choice of types/profiles
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                122. Procedure.recorder
                                Definition

                                Individual who recorded the record and takes responsibility for its content.

                                ShortWho recorded the procedure
                                Control0..1
                                TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                124. Procedure.asserter
                                Definition

                                Individual who is making the procedure statement.

                                ShortPerson who asserts this procedure
                                Control0..1
                                TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                126. Procedure.performer
                                Definition

                                Limited to "real" people rather than equipment.

                                ShortThe people who performed the procedure
                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                128. Procedure.performer.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                130. Procedure.performer.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                132. Procedure.performer.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                134. Procedure.performer.function
                                Definition

                                Distinguishes the type of involvement of the performer in the procedure. For example, surgeon, anaesthetist, endoscopist.

                                ShortType of performance
                                Control0..1
                                BindingFor example codes, see ProcedurePerformerRoleCodes
                                (example to http://hl7.org/fhir/ValueSet/performer-role|4.0.1)

                                A code that identifies the role of a performer of the procedure.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Allows disambiguation of the types of involvement of different performers.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                136. Procedure.performer.actor
                                Definition

                                The practitioner who was involved in the procedure.

                                ShortThe reference to the practitioner
                                Control1..1
                                TypeReference(Practitioner, PractitionerRole, Organization, Patient, RelatedPerson, Device)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                A reference to Device supports use cases, such as pacemakers.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                138. Procedure.performer.onBehalfOf
                                Definition

                                The organization the device or practitioner was acting on behalf of.

                                ShortOrganization the device or practitioner was acting for
                                Control0..1
                                TypeReference(Organization)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Practitioners and Devices can be associated with multiple organizations. This element indicates which organization they were acting on behalf of when performing the action.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                140. Procedure.location
                                Definition

                                The location where the procedure actually happened. E.g. a newborn at home, a tracheostomy at a restaurant.

                                ShortWhere the procedure happened
                                Control0..1
                                TypeReference(Location)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Ties a procedure to where the records are likely kept.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                142. Procedure.reasonCode
                                Definition

                                The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

                                ShortCoded reason procedure performed
                                Comments

                                Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                                Control0..*
                                BindingFor example codes, see ProcedureReasonCodes
                                (example to http://hl7.org/fhir/ValueSet/procedure-reason|4.0.1)

                                A code that identifies the reason a procedure is required.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                144. Procedure.reasonReference
                                Definition

                                The justification of why the procedure was performed.

                                ShortThe justification that the procedure was performed
                                Comments

                                It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

                                Control0..*
                                TypeReference(Condition, Observation, Procedure, DiagnosticReport, DocumentReference)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                146. Procedure.bodySite
                                Definition

                                Detailed and structured anatomical location information. Multiple locations are allowed - e.g. multiple punch biopsies of a lesion.

                                ShortTarget body sites
                                Comments

                                If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension procedure-targetbodystructure.

                                Control0..*
                                BindingFor example codes, see SNOMEDCTBodyStructures
                                (example to http://hl7.org/fhir/ValueSet/body-site|4.0.1)

                                Codes describing anatomical locations. May include laterality.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                148. Procedure.outcome
                                Definition

                                The outcome of the procedure - did it resolve the reasons for the procedure being performed?

                                ShortThe result of procedure
                                Comments

                                If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

                                Control0..1
                                BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT)
                                (example to http://hl7.org/fhir/ValueSet/procedure-outcome|4.0.1)

                                An outcome of a procedure - whether it was resolved or otherwise.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                150. Procedure.report
                                Definition

                                This could be a histology result, pathology report, surgical report, etc.

                                ShortAny report resulting from the procedure
                                Comments

                                There could potentially be multiple reports - e.g. if this was a procedure which took multiple biopsies resulting in a number of anatomical pathology reports.

                                Control0..*
                                TypeReference(DiagnosticReport, DocumentReference, Composition)
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                152. Procedure.complication
                                Definition

                                Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

                                ShortComplication following the procedure
                                Comments

                                If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

                                Control0..*
                                BindingFor example codes, see Condition/Problem/DiagnosisCodes
                                (example to http://hl7.org/fhir/ValueSet/condition-code|4.0.1)

                                Codes describing complications that resulted from a procedure.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                154. Procedure.complicationDetail
                                Definition

                                Any complications that occurred during the procedure, or in the immediate post-performance period.

                                ShortA condition that is a result of the procedure
                                Control0..*
                                TypeReference(Condition)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                156. Procedure.followUp
                                Definition

                                If the procedure required specific follow up - e.g. removal of sutures. The follow up may be represented as a simple note or could potentially be more complex, in which case the CarePlan resource can be used.

                                ShortInstructions for follow up
                                Control0..*
                                BindingFor example codes, see ProcedureFollowUpCodes(SNOMEDCT)
                                (example to http://hl7.org/fhir/ValueSet/procedure-followup|4.0.1)

                                Specific follow up required for a procedure e.g. removal of sutures.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                158. Procedure.note
                                Definition

                                Any other notes and comments about the procedure.

                                ShortNotizen
                                Comments

                                Ergänzende Hinweise und Anmerkungen zur Prozedur

                                Control0..*
                                TypeAnnotation
                                Is Modifierfalse
                                Must Supporttrue
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                160. Procedure.focalDevice
                                Definition

                                A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

                                ShortManipulated, implanted, or removed device
                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                162. Procedure.focalDevice.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                164. Procedure.focalDevice.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                166. Procedure.focalDevice.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                168. Procedure.focalDevice.action
                                Definition

                                The kind of change that happened to the device during the procedure.

                                ShortKind of change to device
                                Control0..1
                                BindingThe codes SHOULD be taken from ProcedureDeviceActionCodes
                                (preferred to http://hl7.org/fhir/ValueSet/device-action|4.0.1)

                                A kind of change that happened to the device during the procedure.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                170. Procedure.focalDevice.manipulated
                                Definition

                                The device that was manipulated (changed) during the procedure.

                                ShortDevice that was changed
                                Control1..1
                                TypeReference(Device)
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                172. Procedure.usedReference
                                Definition

                                Identifies medications, devices and any other substance used as part of the procedure.

                                ShortItems used during procedure
                                Comments

                                For devices actually implanted or removed, use Procedure.device.

                                Control0..*
                                TypeReference(Device, Medication, Substance)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Used for tracking contamination, etc.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                174. Procedure.usedCode
                                Definition

                                Identifies coded items that were used as part of the procedure.

                                ShortCoded items used during the procedure
                                Comments

                                For devices actually implanted or removed, use Procedure.device.

                                Control0..*
                                BindingFor example codes, see FHIRDeviceTypes
                                (example to http://hl7.org/fhir/ValueSet/device-kind|4.0.1)

                                Codes describing items used during a procedure.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))